Universal CD-9775 manual Avoid These Locations

Page 5

Existing Homes:

The NFPA requires a smoke alarm on every level and outside each sleeping area in existing construction. An existing household with one level and one sleeping area is required to have one smoke alarm.

New Construction Homes and Manufactured Homes:

The NFPArequires AC-powered, interconnected smoke alarms to be installed inside each bedroom, outside each bedroom area, and on every level of the home. They also require a minimum of two AC-powered, interconnected smoke alarms in any new construction home.

Sloped Ceilings (Peaked Ceilings):

Smoke alarms or smoke detectors mounted on a peaked ceiling shall be located within 36 in. (914 mm) horizontally of the peak, but not closer than 4 in. (102 mm) vertically to the peak.

Sloped Ceilings (Shed Ceilings):

Smoke alarms or smoke detectors mounted on a sloped ceiling having a rise greater than 1 ft. in 8 ft. (1 m in 8

m)horizontally shall be located within 36 in. (914 mm) of the high side of the ceiling, but not closer than 4 in. (102

mm)from the adjoining wall surface.

Tray-Shaped Ceilings:

Smoke Alarms or smoke detectors shall be installed on the highest portion of the ceiling or on the sloped portion of the ceiling within 12 in. (305 mm) vertically down from the highest point.

Mobile Home Installation:

For minimum protection, smoke alarms should be installed in compliance with H.U.D. Manufactured Home Construction Safety Standards, Title 24 CFR, Section 3280.208 and Section 3282. For additional protection, see Single Story Residence smoke alarm requirements/recommendations for Existing Homes and New Construction Homes.

Note: For mobile homes built before 1978, install smoke alarms on inside walls between 4” and 12” from the ceiling (older mobile homes have little or no insulation in the ceiling). This is especially important if the ceiling is unusually hot or cold.

Install a smoke alarm inside each bedroom and in the hallway outside each separate sleeping area.

AVOID THESE LOCATIONS

the garage – products of combustion are present when you start your automobile.

in areas with high humidity, like bathrooms or areas near dishwashers or washing machines. Install at least 3 feet (0.9 meters) away from these areas.

in areas of turbulent air such as air returns or heating and cooling supply vents. Install at least 3 feet (0.9 meters) away from these areas.

in extremely dusty, dirty or insect-infested areas. Loose particles interfere with smoke alarm operation.

in areas where temperature may fall below 400F (4.40C) or rise above 1000F (37.80C).

closer than 5 feet (1.5m) from fluorescent lights, electrical "noise" and flickering may affect the alarm's operation.

do not locate this alarm within 5 feet (1.5m) of any cooking appliance.

in areas of reverse venting of fuel burning appliances caused by outdoor ambient conditions, such as:

-wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/ humid air with extended periods between cycles).

-negative pressure differential resulting from the use of exhaust fans.

-simultaneous operation of several fuel burning appliances competing for limited internal air.

-vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.

-obstructions in or unconventional vent pipe designs which can amplify the above situations.

-extended operation of unvented fuel burning devices (range, oven, fireplace, etc.).

-temperature inversions which can trap exhaust gasses near the ground.

-car idling in an open or closed attached garage or near a home.

to reduce the possibility of nuisance tripping of the alarm’s alarm circuit, accommodation spaces are to be well ventilated when household cleaning supplies or similar contaminants are used.

Page 5

Image 5
Contents Limitations and Functions Read ALL InstructionsWhat YOU should do if the CO Alarm Sounds Important Safety InformationWhat YOU should Know about Carbon Monoxide CO Mild ExposureImportant Considerations What YOU should do if the Smoke Alarm SoundsRecommendations LocationAvoid These Locations OPERATION, Testing & Maintenance Installation and OperationInstallation Instructions CAUTION!! Read Carefully Page Repairs and Services Backup Battery ReplacementUniversal Five Year Limited Warranty

CD-9775 specifications

The Universal CD-9775 is a cutting-edge compact disc player renowned for its advanced features and high-quality sound reproduction. Designed with audiophiles in mind, the CD-9775 combines sleek aesthetics with robust technology, making it a standout component in any home audio system.

One of the key features of the Universal CD-9775 is its high-resolution audio playback capability. This unit supports various audio formats, including standard CDs, CD-Rs, and CD-RWs, offering versatility for music enthusiasts. The player's ability to decode and play high-resolution audio files ensures that listeners can enjoy every nuance of their favorite tracks.

The CD-9775 employs a precision-engineered transport mechanism that minimizes vibration and improves tracking accuracy. This technology enhances audio clarity and detail, resulting in a more immersive listening experience. The high-quality D/A converter used in this player further assists in delivering crystal-clear sound, allowing users to appreciate the depth and richness of their music collection.

In terms of connectivity, the Universal CD-9775 is equipped with multiple output options, including RCA analog outputs and digital outputs, such as optical and coaxial connections. This flexibility allows users to connect the player to various audio systems, whether they be traditional stereo setups or modern home theater configurations.

Another notable characteristic of the CD-9775 is its user-friendly interface. The sleek front panel features a clear display, making it easy to navigate through tracks and settings. Additionally, the inclusion of a remote control provides convenience, enabling users to operate the device from a distance without hassle.

When it comes to build quality, the CD-9775 does not disappoint. Constructed with durable materials, the player is designed to withstand the test of time, ensuring longevity and reliable performance. Its elegant design seamlessly integrates into any living space, appealing to both functionality and style.

Overall, the Universal CD-9775 is a testament to high-fidelity audio engineering. With its blend of advanced technologies, remarkable sound quality, and user-centric design, this compact disc player is an ideal choice for anyone seeking to elevate their music listening experience. Whether for casual listeners or serious audiophiles, the CD-9775 stands out as a premier option in the world of audio equipment, offering a compelling mix of performance and elegance.