Universal 100R-NG owner manual Model, Operating Instructions Servicing

Page 5

 

MODEL

 

100-RANG

OPERATING INSTRUCTIONS

SERVICING

PREPARINGFOROPERATION

 

1.Check the heater for possible shipping damage. If any is found, immediately notify your dealer.

2.Follow all of the "Safety Precautions".

3.Install plumbing to a low pressure (1/2 psig Maximum) source of natural gas, using a minimum 3/4" ID hose or flexible connector not over 10 feet in length.

4.Connect the hose to the heater at the 1/2" SAE flare fitting at the inlet.

5.Securely tighten all gas connections.

6.Open the gas cock and leak check all gas connections with a solution of soap and water. DO NOT USE A FLAME.

START

1.Fully open the gas cock at the natural gas source.

2.Place control knob of the safety pilot valve in pilot position and depress the knob admitting gas to pilot. Push and release piezo button until the pilot lights, multiple tries may be necessary. Alternately place a lighted match near the (pilot is above the valve sheild). If hose is filled with

air, allow a few minutes for gas to reach the pilot.

3.When pilot lights, continue to hold the button on the safety pilot valve depressed for 30 seconds, then release.

4.If the pilot goes out, wait 5 minutes and repeat the start procedures.

5.When the pilot remains lit, turn the knob left 1/4 turn to the "ON" position and the main burner will light.

CAUTION; INADEQUATE FUEL SUPPLY or lowering burn rate can cause sooting.

STOP

1.Securely close the gas cock at the gas source.

2.Depress the control knob of the pilot valve and turn clockwise to "OFF" position.

RESTARTAFTERSAFETYSHUTDOWN

1.Securely close gas cock at the gas source.

2.Wait 5 minutes.

3.Restart following "Start" procedures.

A hazardous condition may result if a heater is used that has been modified or is not functiong properly. When the heater is working properly:

*The flame is contained within the heater.

*The flame is essentially blue with perhaps some yellow tipping.

*There is no strong disagreeable odor, eye burning or other physical discomfort.

*There is no smoke or soot internal or external to the heater.

*There are no unplanned or unexplained shut downs of the heater.

The parts list show the heater as it was constructed. Do not use a heater which is different from that shown. For this heater, the regulator must be set to supply 4" water column (W.C.) outlet pressure. If there is any uncertainty about the regulator setting, havie checked.

A heater which is not working right must be repaired, but only by a trained, experienced service person. To find the service center closest to you, visit our webside at www.scheuco.com or call (888) 619-7060.

You may also obtain in-warranty or out-of-warranty service by taking the product to your local service center.

In-warranty products will be repaired with no charge for either parts or labor. Please include a breif statement indicating date, place of purchase, the nature of the problem and proof of purchase.

Out-of-warranty products will be repaired with a charge for parts and labor.

Page -5-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Retain These Instructions for Future Reference Table of ContentsModel 100R-NG Heater SpecificationsOperating Precautions Safety Precautions ODORFADING-NOODORDETECTED Odor Fade WarningFuelgasodor Operating Instructions Servicing Model100RNG Parts Limitedwarranty WarrantyService Centers Instructions for Ordering Parts Warranty Registration Scheu Products COMPANY, INC

100R-NG specifications

The Universal 100R-NG is a state-of-the-art gas turbine engine designed for a wide range of industrial applications, including power generation and various industrial processes. It represents a significant advancement in turbine technology, integrating high-efficiency features and innovative design to meet the demands of modern energy needs.

One of the standout features of the Universal 100R-NG is its high thermal efficiency. With an improved cycle design, it achieves optimal performance, converting a large proportion of the energy in natural gas into useful power. This efficiency translates into reduced fuel consumption and lower operating costs, making it an attractive option for businesses aiming to minimize their carbon footprint.

The engine incorporates advanced materials and manufacturing techniques that enhance its durability and longevity. High-temperature superalloys are used in critical components, enabling the turbine to withstand extreme conditions while maintaining performance. Additionally, the design of the Universal 100R-NG allows for easy maintenance and servicing, which reduces downtime and increases operational reliability.

Another key characteristic of the Universal 100R-NG is its adaptability. It can operate on various types of gaseous fuels, including natural gas and biogas, making it a versatile choice for different regions and applications. This flexibility is essential in meeting local energy needs while aligning with global sustainability goals.

The engine also features advanced control systems that optimize performance and ensure safe operation under various load conditions. These systems include digital automation and real-time monitoring, which provide operators with critical data to enhance decision-making and improve responsiveness to changing conditions.

Furthermore, the Universal 100R-NG is designed with emissions reduction in mind. It incorporates technologies such as dry low NOx combustion to minimize pollutants, ensuring compliance with stringent environmental regulations. This commitment to clean technology not only benefits the environment but also helps companies in maintaining their reputations as responsible energy producers.

In summary, the Universal 100R-NG is a groundbreaking gas turbine engine characterized by its high efficiency, advanced materials, operational flexibility, and robust emission controls. These features make it an ideal solution for industries seeking to enhance productivity while minimizing environmental impact. As the world transitions towards cleaner energy sources, the Universal 100R-NG stands out as a leading option for sustainable power generation.
Top Page Image Contents