Table of Contents

Your new Pyle Pro PT Series P.A. Amplifier gives you the power and versatility you need in a professional sound system. The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material. It can be used for live bands, office paging systems, public annoucement systems, or a variety of other installations.

1Features and controls, PT2000 and PT1600

2Features and controls, PT1200

3Installation Guidelines

3Input Connections

3Connecting a CD or tape player or tuner

3Connecting an additional CD sound source

3Connecting an equalizer or signal processor

3Connecting microphones

3Speaker connections

3Connector options

4Bridged Mode Operation

4Using headphones

4Connecting to AC power

4Mounting the amplifier

4Turning the amplifier on

4Using the power meter (PT2000 and PT1600 only)

4Using the meter range selector (PT2000 and PT1600 only)

5Using the left and right output level controls

5About the internal clip circuitry

5Using the A/B Speaker Selector

5Caring for your Pyle Pro Amplifier

5Replacing a fuse

6Specifications

6Limited warranty

FEATURES AND CONTROLS	Meter Range Switch
	Meter Range Switch
	Controls the sensitivity
Left and Right Power Meters	of the power meter
Left and Right Power Meters
Indicates the output signal level
for each channel
FRONT PANEL, PT1600

Clip Circuit and Indicator This special circuitry protects the amplifier and speaker system from being damaged by overdriving power levels. Indicator lights remind the user to reduce the volume when amplifier output is excessive.

Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of
installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of
trouble-free service from this product.
FEATURES AND CONTROLS	Meter Range Switch
	Meter Range Switch
	Controls the sensitivity
	of the power meter

FRONT PANEL, PT2000

Left and Right Power Meters Indicates the output signal level for each channel

Power On/Off

Left and Right Output Level Controls Lets you adjust the sound levels for each channel

REAR PANEL, PT2000 and PT1600

Phone Jack Lets you connect a pair of stereo headphones for private listening or cueing (monitoring) sound prior to “airing” it.

Speaker A/B Selector Switches Permits you to select speakers attached to terminal set A, set B or both.

STEREO	INPUT
STEREO	R	L
		1
MONO		MONO
		MONO
GND
		2
	R	L

R		L		FUSE
R		L
RIGHT		LEFT		VOLTAGE
A
–		MONO	+
B
+	–	–	+
	SPEAKER			AC OUTLET
				AC OUTLET

Power On/Off
Phone Jack	Left and Right Output Level Controls
Lets you connect a pair of stereo headphones	Lets you adjust the sound levels for each channel
for private listening or cueing (monitoring)
sound prior to “airing” it.
Speaker A/B Selector Switches
Permits you to select speakers
attached to terminal set A, set B or
both.

Stereo/Mono Selector Lets you select bridged mono input mode in combination with a mono signal source plugged into the Left channel, or conventional stereo operation with a stereo input signal.

Input Jacks Lets you connect a variety of audio input sources via the balanced (XLR/6.35mm phone jack combinations) or unbalanced (RCA) inputs.

Speaker terminals	AC Outlet
Permits hookup of two	This switched outlet allows
stereo pairs of speakers	the electrical hookup of
via the wire terminals.	other units, with maximum
Speaker pair A can also	load of 300W.
be connected via the

6.35mm phone jacks provided.

Fan Cooling Cooling system is automatically activated whenever amplifier is turned on. This forced air cooling system rapidly exhausts interior heat, reducing operating temperature and aiding performance.

PYLE PRO PT2000/1600/1200 Amplifier Owner’s Manual

– 1

PYLE Audio PT1600, PT2000, PT1200 owner manual Table of Contents