Connecting the Unit to Power, Setting the Time

LOCATION OF CONTROLS

1	Adjustable Dock Dial	11	Program/Memory/Alarm2 Button
2	iPod/iPhone Connector	12	Volume + Button
3	Speaker	13	Volume - Button
4	CD Compartment	14	Open CD Door Button
5	Power/Alarm Off Button	15	Remote Sensor
6	Function/Clock Adjust Button	16	Display
7	Play/Pause/Sync Button	17	DC In Jack
8	Skip-/Tune- Button	18	FM Antenna
9	Skip+/Tune+ Button	19	Aux-In Jack
10	Stop/Memory+/Alarm1 Button

- 4 -

CONNECTING THE UNIT TO POWER

Plug one end of the AC/DC adaptor into the DC-In jack, and then plug the other end into AC wall outlet. Before switching on the unit, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.

Backu-up Battery

Open the battery door located at the bottom of the unit, insert 2 pcs. ‘AAA’ size (UM-4) batteries with battery polarities same as shown inside the battery compartment.

In case of AC power outage or interrupted AC power, the current time, alarm time settings and the stored radio stations are preserved in the memory of the unit.

Important: When the unit is not use for 3 days or more and also the unit is not connect to AC power during that time, please remove the battery to avoid damage to the set from leakage of battery.

SETTING THE TIME

Before starting to set the time, make sure that the unit is in POWER OFF Mode .

If you have iPod (Except iPod Shuffle) or iPhone

1.) Dock in the iPod/iPhone on the 30 pins Connector

2.) Press the ‘PLAY/PAUSE/SYNC’ button for a few seconds until the display will show SYNC with flashing, then the unit will synchronize the time same as the iPod/iPhone’s automatically.

If you do not have any iPod/iPhone units

1.) Press and hold the ‘FUNC/CL ADJ’ button for a few seconds, the hour digit in the display will start flashing.

2.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the hour.

3.) When the correct hour is selected, press the ‘FUNC/CL.ADJ’ button again to enter the minute mode with minute digit flashing.

4.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the minute.

5.) When the correct time is selected, press the ‘FUNC/CL ADJ’ button to store the time in the memory.

SETTING THE ALARM TIME

Before starting to set the alarm time, make sure that the unit is in POWER OFF mode.

1.) Press the ‘MEM+/AL1’ or ‘MEM/AL2’ button once (You can also use the ‘AL1’ or ‘AL2’ button on the remote control) and the AL1 or AL2 icon will appear in the display.

2.) Press the ‘FUNC/CL. ADJ.’ button to select the alarm wake up source. You can choose buzzer, iPod/iPhone, Radio or CD.

3.) Press and hold the ‘MEM+/AL1’ or ‘MEM/AL2’ button for a few seconds, the alarm hour digit will begin flashing.

4.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the alarm hour.

5.) When the desired alarm hour is selected, press the ‘MEM+/AL1’ or ‘MEM/AL2’ button again, the alarm minute digit will begin flashing.

6.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the alarm minute.

7.) When the desired alarm time is selected, press the ‘MEM+/AL1’ or ‘MEM/AL2’ button again to confirm.

Note : If you choose iPod/iPhone or CD as the alarm wake up source, please make sure that you havehave the iPod/iPhone or CD in place.

- 5 -

PICL48 specifications

The PYLE Audio PICL48 is a powerful and versatile portable PA system designed for those who require quality sound reinforcement in various environments. Whether used for outdoor events, public speaking, or musical performances, this audio solution combines portability with superb audio quality.

One of the main features of the PICL48 is its impressive 48-watt RMS power output. This allows for loud, clear sound capable of reaching large crowds without distortion. The system is equipped with a 10-inch woofer and a piezo tweeter, which together produce a wide frequency range, ensuring that both bass and treble frequencies are well-represented. It’s designed to handle a variety of audio sources, making it suitable for everything from music playback to live vocal performances.

The PICL48 comes with built-in Bluetooth technology, enabling users to wirelessly connect their devices for seamless audio streaming. This feature is particularly useful for DJs and presenters who want to play music or audio from smartphones, tablets, or laptops without the hassle of connecting multiple cables. Additionally, it includes a USB port and an SD card slot, allowing for playback of MP3 files directly from storage devices.

Another significant characteristic of the PYLE Audio PICL48 is its versatility in input options. It features dual microphone inputs, which are ideal for karaoke sessions or multi-speaker events. The gain control for each microphone allows for precise audio balancing, ensuring that all voices are heard clearly. The system also has an integrated rechargeable battery, offering portability for outdoor and remote events without the need for a power outlet.

Built with durability in mind, the PICL48 features a rugged cabinet that protects the internal components while ensuring reliability during transport. Its lightweight design and built-in handle make it easy to carry, while the wheeled construction provides added mobility when moving long distances.

In summary, the PYLE Audio PICL48 is a user-friendly and reliable portable PA system packed with features such as Bluetooth connectivity, multiple input options, impressive sound output, and a rechargeable battery. Perfect for events of any size, it stands out as an exceptional choice for anyone needing quality sound reinforcement on the go.