Panel Information _________________________________________________________________
1 | 2 | 7 | 3 | 4 | 5 | 6 |
|
|
|
|
|
| |
P OW ER |
|
|
|
| R |
|
|
|
|
|
|
| |
|
|
|
|
|
| V OLU ME |
|
|
| M O DE / ST OR E | T U NIN G |
|
|
R ES ET
P HON E S |
|
|
|
|
|
|
| SU R R . |
P H ON O | D V D | C D | TAP E TU NE R/B AN D | FL AT | PO P | CL AS S I C | R OC K | E QUAL IZ ER S OUN D |
89
1. Power key
This switch turns the power ON/OFF (STANDBY).
2. Remote Standby Indicator
The Power Amplifier is in remote standby state if the remote standby indicator is lighted.
3. Mode/Store
When in tuner mode, press this button once to select Auto tuning mode; press it the second time to select the Manual tuning mode; press it the third time to select the Preset tuning mode, then by pressing the Tuning +/- button to select a preset station; pressing and holding this button (in any of the modes above) for 5 seconds brings up the “MEM” icon and display the next available preset for storing the current frequency.
4.Tuning +/- key Frequency up and down.
5.Remote sensor
Work with the remote control.
6. Volume Control
This is used to control the sound heard from the speakers or through the headphones. Rotate it in clockwise or in counter clockwise, the volume will be increased or decreased.
7. Reset
Switch on the POWER, use a paper clip to press the RESET button for more than 3 seconds duration, then all the current set up memory will be erased and back to the factory default.
10 | 11 | 12 |
8. Phones jack
This is the jack for headphones. Connect the plug on the stereo headphones for private listening.
Adjust the volume so that it does not hurt your ears when using the headphones.
-If you do not intend to use your headphones, always ensure that you unplug them.
9. Input selector keys
These keys are used to select the program sources. Press the desired key from the PHONO, DVD, CD, TAPE, and TUNER/Band keys.
10. Sound field keys
Press these keys to select one of the four sound mode: Flat, Pop, Classic or Rock.
11. Equalizer key
Press this key to select inside EQ or outside EQ.
12. Surround key
Press this key to select surround on or off.
5