Safety tips

ETL-ES-IndustrialWC-WH14

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED 'ACCEPTABLE FOR FAN SUPPORT OF 15.9 KG (35 LBS) OR LESS' AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT DIRECTLY FROM BUILDING STRUCTURE. MOST OUTLET BOXES COMMONLY USED FOR THE SUPPORT OF LUMINARIES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

1.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards (ANSI/NFPA 70-1996), including fire-rated construction.

2.Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

3.After making the wire connections, gently push connections into outlet box with wire nuts pointing up. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

4.Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

5.Be cautious! Read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

6.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7.Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 10 feet from the floor to the trailing edge of the blade.

8.To reduce the risk of fire, electric shock, or personal injury, this fan must be mounted to an outlet box marked suitable for fan support. And use mounting screws provided with the outlet box. (Mounting must support at least 35 lbs.)

9.Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

10.Attach the mounting bracket using only the hardware supplied with the outlet box. Fan is only to be mounted to an outlet box marked “Acceptable for Fan Support”.

11.To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

12.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

13.NEVER place a switch where it can be reached from a tub or shower.

14.The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

15.Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

16.All set screws must be checked and re-tightened where necessary before installation.

	TOOLS REQUIRED
Phillips Screwdriver	Wire Cutters	Pliers	Step Ladder

ETL-ES-IndustrialWC-WH14 specifications

The Westinghouse ETL-ES-IndustrialWC-WH14 is a high-performance industrial wall pack light designed to deliver effective illumination for commercial and industrial applications. Known for its durability and efficiency, this fixture is ideal for outdoor areas such as loading docks, exterior building walls, and parking lots, where robust lighting is crucial for safety and security.

One of the main features of the ETL-ES-IndustrialWC-WH14 is its energy-efficient LED technology. This innovative lighting solution consumes significantly less energy compared to traditional incandescent or fluorescent lights, leading to reduced energy bills and a smaller carbon footprint. The fixture typically boasts an impressive lumen output, ensuring bright and even illumination across any given area.

Another notable characteristic of the ETL-ES-IndustrialWC-WH14 is its rugged construction. Designed to withstand harsh environmental conditions, it features a sturdy housing made of corrosion-resistant materials. This ensures longevity and reliability, particularly in industrial settings where equipment is often exposed to the elements. Additionally, the fixture is equipped with impact-resistant glass, providing further protection against accidental damage.

The ETL-ES-IndustrialWC-WH14 also stands out with its advanced thermal management system. This feature ensures optimal performance by dissipating heat effectively, thus extending the lifespan of the LEDs. With a long operational life, often exceeding 50,000 hours, maintenance and replacement costs are significantly reduced, making this fixture a cost-effective solution over time.

Installation of the Westinghouse ETL-ES-IndustrialWC-WH14 is straightforward, thanks to its versatile design. This wall pack light can be mounted in various positions, allowing for flexibility in deployment to meet specific lighting needs. Its sleek, low-profile design also enhances the aesthetic appeal of any facility while serving a practical function.

Moreover, this fixture can be integrated with smart technologies for enhanced control and monitoring. Features such as motion sensors and dimming capabilities can be added to optimize energy use and adapt lighting levels based on occupancy and natural light conditions.

In summary, the Westinghouse ETL-ES-IndustrialWC-WH14 is a powerful, durable, and energy-efficient lighting solution that meets the demanding requirements of industrial and commercial environments. Its advanced technology, rugged design, and smart features make it an excellent choice for organizations looking to enhance visibility, safety, and energy efficiency in their outdoor spaces.