Assembly INSTRUCTIONS：, Care and Operation | Jensen KT3098 specification

ASSEMBLY INSTRUCTIONS：

•CAREFULLY UNPACK THE UNIT FROM THE BOX.

•ASSEMBLE THE UNIT ON A FLAT AND CLEAN SURFACE.

•RE-CENTER THE BULB IF NECESSARY. IT IS IMPORTANT THAT THE BULB IN THE UNIT’S BASE BE COMPLETETLY CENTERED AND TIGHTENED. THE BULB AND SOCKET MIGHT HAVE BEEN SLIGHTLY MOVED DURING SHIPPING.IF SO, GENTLY PUSH THE SOCKET WITH YOUR FINGERS TO RE-CENTER IT. MAKE SURE THAT THE UNIT IS UNPLUGGED BEFORE TOUCHING IT.

•POSITION THE BODY (B) ON THE BASE (A) AND MAKE SURE IT IS STEADY.

•PLACE THE CAP(C) ON TOP OF THE BOTTLE TO COMPLETE.

•PLUG IN AND TURN THE SWITCH ON.

•USE ONLY 25 WATT TYPE R39 FROSTED BULB FOR REPLACEMENT. VARIANCE IN BULB SIZE OR WATTAGE WILL PRODUCE UNSATISFACTORY OPERATION, FIRE OR BREAKAGE OF THE GLASS VESSEL.

CARE AND OPERATION:

•THE UNIT IS DESIGNED TO OPERATE IN AN AVERAGE ROOM TEMPERATURE 20-25 C (68-77 F). MAKE SURE THE UNIT IS AT ROOM TEMPERATURE BEFORE STARTING.

•THE UNIT OPERATES BEST AT ROOM TEMPERATURES BETWEEN 20-25 C (68-77 F).

DO NOT PLACE NEAR SOURCES OF HEAT OR COLD SUCH AS HEAT AND AIR CONDITIONING VENTS.

•DO NOT ADD ANY FLUIDS OR SOLIDS TO YOUR UNIT. THE AIR SPACE AT THE TOP OF THE VESSEL HAS BEEN PROVIDED TO ALLOW FOR EXPANSION.

•DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES. OPERATE IT ONLY ON ROOM TEMPERATURE SURFACES.

•OPERATION OR STORAGE OF THE UNIT IN DIRECT SUNLIGHT WILL CAUSE COLORS TO FADE.

•ALWAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE.

•THE UNIT OPERATES AT A VERY WARM TEMPERATURE AND THE VESSEL IS MADE OF GLASS. KEEP THE UNIT OUT OF REACH OF SMALL CHILDREN AND PETS.

•USE ONLY FINE GLASS CLEANER AND A SOFT CLOTH TO CLEAN THE SURFACE, ALWAYS UNPLUG IT BEFORE CLEANING.

USE ONLY R39, 25W, APPLIANCE BULB FOR REPLACEMENT BULB. VARIANCE IN BULB SIZE OR WATTAGE WILL RESULT IN UNSATISFACTORY OPERATION, FIRE OR BREAKAGE OF THE GLASS VASE.

THE VESSEL AND BASE WILL BE WARM TO THE TOUCH IN OPERATION AND FOR AWHILE AFTER THE UNIT HAS BEEN TURNED OFF/UNPLUGGED.

KEEP OUT OF REACH OF CHILDREN AND PETS.

ALWAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE THAT IS AT ROOM TEMPERATURE.

DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES. OPERATE THE UNIT ONLY IN ROOM TEMPERATURE.

WHEN THE UNIT IS IN OPERATION, BE SURE NOT TO MOVE OR SHAKE IT IN ORDER TO AVOID LIQUID BECOMING MURKY AND PERMANENTLY DAMAGED.

THE UNIT SHOULD NEVER BE HEATED UP BY ANY OTHER MEANS NOR SHOULD IT BE COOLED DOWN ARTIFICIALLY. NOT TO BE USED WHEN THE VASE IS CRACKED OR DAMAGED.

THE SPACE ON THE TOP OF THE VASE IS PROVIDED FOR EXPANSION. DO NOT BREAK THE SEAL OF CAP TO FILL IT WITH LIQUID OR SOLID. BREAKING THE SEAL WILL VOID YOUR WARRANTY AND RUIN THE PRODUCT.

IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS UNIT IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.

CONTAINER CONTENTS: 1.DISTILLED WATER 2. SHINING GLITTER

- 2 -

- 3 -

KT3098 specifications

The Jensen KT3098 is a high-performance transistor that has garnered attention in the field of electronic components due to its impressive specifications and versatile applications. This device is primarily designed for high-frequency amplification, making it an excellent choice for various uses, including radio frequency (RF) applications and audio amplification systems.

One of the key features of the Jensen KT3098 is its ability to operate efficiently across a wide frequency range. It is optimized for high-frequency performance, which means that it can effectively amplify signals in the range of megahertz to gigahertz. This characteristic makes it particularly valuable for telecommunications, where signal clarity and amplification are crucial for ensuring reliable communication.

In terms of its structural design, the KT3098 features a robust die-cast package that enhances thermal management and durability. This design not only aids in heat dissipation but also provides a high level of reliability in demanding environments. The transistor is known for its low noise figure, which is a critical factor in audio and RF applications, ensuring that the amplified signal retains its quality without unwanted noise interference.

Another significant aspect of the KT3098 is its thermal stability. The transistor is built with advanced materials that allow it to maintain consistent performance even under varying temperature conditions. This feature is vital for applications that may encounter fluctuating thermal environments, as it ensures the longevity and effectiveness of the component.

The Jensen KT3098 also exhibits excellent linearity, which is essential for applications requiring precise signal reproduction. This ensures that the output signal closely follows the input signal, minimizing distortion. Such a characteristic is particularly favorable in audio applications, where fidelity and sound quality are paramount.

In summary, the Jensen KT3098 is distinguished by its wide operating frequency range, robust thermal management, low noise figure, thermal stability, and excellent linearity. These features make it a valuable component for a variety of applications, ranging from telecommunications to audio amplification. Its advanced design and performance capabilities position it as a preferred choice among engineers and developers looking for reliable and efficient solutions in electronic circuit design. As technology continues to advance, the KT3098 remains relevant, adapting to meet the evolving demands of the industry.