PYLE Audio PT610 owner manual PYE PRO Amplifiers

Limited Warranty

All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for five (2) years from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier.

Should the unit fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of PYLE.

To obtain warranty service, you must first call our Consumer Return Hotline at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must appear on the outside of your package and on all paperwork relating to your return.

When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to:

R.A.#: _____________

PYLE PRO Service Center

1600 63rd Street

Brooklyn, NY 11204

You must also include the following items with your return:

•A copy of your sales receipt or other proof of purchase

•A brief letter, indicating the problem you are experiencing with the product

•Include in your letter your return address, daytime phone number and R.A. number

•Also include a check or money order for $15.00 for return shipping, handling and insurance, or provide your Visa/MC number with expiration date.

Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage.

PT610 Specifications

Output Power at THD 2%, 8-Ohm Load, 1 kHz		100W
Maximum Power, 8-Ohm Load		200W
Maximum Output, 4-Ohm Load		600W
THD at 70W, 8-Ohm Load, 1 kHz, w/bandpass filter
MIC (phone/XLR jack)		0.35%
CD		0.20%
Line		0.20%
Frequency Response (at 1 Watt, +/- 3 dB)		75 Hz–20 kKz
MIC (phone/XLR jack)
CD		60 Hz–20 kHz
Line		60 Hz–20 kKz
Input Sensitivity (at 2% THD, 1 kHz)		1 mV
MIC
CD		150 mV
Line		150 mV
Signal-to-Noise Ratio		60 dB
MIC
CD		73 dB
Line		73 dB
Notch Filter Effect		300 Hz–3 kHz
Range
Depth		–12 dB
Noise Level (with inputs shorted)		0.75 mV
Power Requirement	120V AC, 60 Hz
Power Fuse		3A/250V
Dimensions H x W x D, inches	4 3/16 x 19 x 12
(mm)	(100 x 483 x 306)

Purchased at:

Music Products Store

Catalog Merchandiser

Sound Contractor/Installer Mail Order

Other

Date of Purchase

Model No.

Serial # (if available)

City, State ZIP

Address

Name Thank you for purchasing this PYLE product. To activate your warranty, please mail this card within 10 days.

PYE PRO AMPLIFIERS
	warranty registration
	card

Weight, lbs (kg) 22.3 (10.1)

PYLE PRO PT610 Amplifier Owner’s Manual – 6