Jasco 45609 manual Optional for 3 or 4-Way Control, Observe Important Wiring Information

Page 8

11.OPTIONAL for 3 or 4-way control): Connect the Traveler wire (usually Red) to the screw terminal marked TRAVELER.

The other end of this Traveler wire connects to the TRAVELER screw terminal on the 45610 Auxiliary Switch. See the following section for information about wiring the 45610 Auxiliary Switch.

12.Insert Z-Wave Switch into the switch box being careful not to pinch or crush wires.

13.Secure the switch to the box using the supplied screws.

14.Mount the wall plate.

15.Reapply power to the circuit at fuse box or circuit breaker and test the system.

Optional for 3 or 4-Way Control:

1. The 45610 requires the following 3 wiring connections:

a.The Traveler wire. This is used to send voltage signals to the primary Z-Wave switch. The signals tell the Z-wave switch what action to perform.

b.Ground.

c.Neutral.

2.DO NOT connect the 45610 auxiliary switch to the home’s black Hot (Line) wire.

Observe Important Wiring Information

Important: This switch is rated for and intended to only be used with copper wire.

The home’s electrical wires may be attached to the screw termi- nals or inserted into the holes in the back of the switch enclosure and clamped in place by tightening the screw terminals. Always follow the recommended wire strip lengths when making wiring connections.

Wire gauge requirements

•Use 14 AWG or larger wires suitable for at least 80° for supply (HOT), Load, Neutral and Traveler connections.

•Use 12 AWG or larger wires suitable for 80° for ground connection.

Wire strip length:

•For attachment to screw terminals: Strip insulation 5/8”.

•For attachment using the enclosure’s holes: Strip insulation 5/8”.

You should now be able to use the rocker to manually turn On/Off the connected load.

Use your primary controller to include the switch in the home control network after the switch is wired as shown in the above

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents On/Off Relay Switch and 3-Way Switch Kit Introduction Not for USE with Medical or Life Support EquipmentWireless Range Controlling AppliancesImportant Note about 3-WAY Circuits Things to consider regarding RF rangeInstallation Single Switch Wiring SchematicWay Wiring Schematic using one 45609 and one Way Wiring Schematic using one 45609 and two 45610’sSingle, Dual and Triple Gang Boxes Observe Important Wiring Information Wire gauge requirementsWire strip length Optional for 3 or 4-Way ControlAir Gap Switch Key FeaturesRemote Control Basic OperationParameter No Length 1 Byte Valid Values = 0 or 1 default Advanced OperationAll On/All Off LED LightInvert Switch Restoring Factory DefaultsWarranty Interoperability with Z-WaveDevicesFCC Compliance with IC Rules and RegulationsSpecifications

45609 specifications

The Jasco 45609 is a versatile and innovative lighting solution designed to enhance both residential and commercial spaces. As part of Jasco's esteemed range of lighting products, the 45609 model stands out for its remarkable blend of functionality, design, and advanced technology.

One of the main features of the Jasco 45609 is its energy efficiency. Utilizing LED technology, this lighting fixture provides significant savings in electricity consumption compared to traditional incandescent bulbs. Not only does this contribute to lower utility bills, but it also supports environmentally-friendly initiatives by reducing carbon footprints. The durable LED components offer a long lifespan, typically exceeding 25,000 hours, making it a smart investment for long-term use.

The Jasco 45609 also includes smart connectivity features, compatible with various home automation systems. Users can enjoy seamless control over the lighting through mobile applications or voice commands, given its integration with popular platforms such as Amazon Alexa and Google Assistant. This level of integration adds a layer of convenience, allowing users to set schedules, adjust brightness, or switch lighting modes remotely.

In terms of design, the Jasco 45609 boasts a sleek and modern aesthetic that complements various interior styles. Its clean lines and contemporary finish make it an attractive addition to any room, be it a living space, office, or retail environment. Moreover, it is designed with versatile mounting options, enabling users to install it in a variety of setups, including flush mounts or pendant modes.

The model also features adjustable color temperatures, allowing users to customize the ambiance according to their mood or activities. This flexibility can transform a space from a bright, energizing environment to a warm and cozy setting simply by shifting between cool and warm light settings.

Furthermore, the Jasco 45609 is equipped with advanced safety features, such as overheat protection and surge protection. This ensures not only longevity of the product but also safety for users, making it a reliable choice in any application.

In summary, the Jasco 45609 serves as a prime example of modern lighting technology. With its energy-efficient LED design, smart home compatibility, elegant aesthetics, adjustable color settings, and robust safety features, it delivers functionality and style that meet the needs of today’s consumers. Whether for home use or as part of a commercial establishment, the Jasco 45609 is a lighting solution that truly stands out.
Top Page Image Contents