Jasco 19200 installation instructions Push Button Mounting Instructions

3.Locate the House Security Code door and screw located on the back of the AC Chime. Remove the screw and take off the door.

4.Locate the chime and pushbutton jumpers shown below.

Push Button Jumpers Chime Jumpers in battery compartment

5.Jumpers 1-6 are used to select 1 of 64 possible home security codes.

6.To change the house code, add or remove jumpers as needed. It is recommended to change only one jumper at a time and then test the system for proper operation. Positions 1-6 on the chime and pushbutton must match exactly.

7.

Push Button Mounting Instructions

Note: Avoid mounting the push button on metal surfaces, as it may result in a reduced range of transmission. Do not mount in an area of rain (direct weather.)

a. Removing the back cover