Wireless Door Chime Kit

GE Model 19208

www.jascoproducts.com

Installation Instructions for Battery Operated

Prior to Installation the Try-Me feature must be removed.

1.Remove the battery cover on the chime.

2.Unplug the red and white wires inside the battery compartment.

3.Remove the battery pack and discard appropriately.

Required Tools: Small flat blade screwdriver, drill, drill bit, and phillips screwdriver.

Included Hardware:

(2) Plastic screw anchors

(2)4x20mm screws (for anchors)

(2)3x20mm screws

(2)Double sided adhesive pads

The wireless door chime Kit has two components:

Chime (receiver)

Push-Button (Transmitter).

Chime Tune Setting

All wireless chimes may have more than one push button. The chime tune for each push button is set with jumpers 7-9.