JVC 2EN instruction manual EN Recording Basic Features, Feature Purpose Operation

14ENRECORDINGBasicFeatures

Zoom-in

Zoom-out

Zoom indicator bar

Power Zoom button

Select Dial				MENU Jog Dial
		Viewfinder
		MENU
	4MENU END		AUTO
	FOCUS
	EXPOSURE		AUTO
	DATE	TIME	25. 12. 98
	TELE	MACRO	OFF
	TAPE LENGTH		T30
	M. W. B.		AUTO
	ZOOM SPEED		FAST
	4NEXT

Menu Screen

ZOOM SPEED

FAST

SLOW

FEATURE:

PURPOSE:

OPERATION:

NOTE:

Zooming

To produce the zoom in/out effect, or an instantaneous change in image magnification.

Zoom In

Press the “T” of the Power Zoom Button.

Zoom Out

Press “W” of the Power Zoom Button.

■Zooming speed is available. A total of 4 zoom speeds are available. 2 speeds can be selected depending on how hard the Power Zoom Button is pressed (press the button fully for regular-speed, press it lightly for slow-speed), while 2 speed levels (FAST/SLOW) can be selected in the ZOOM SPEED Menu depending on the overall speed you prefer.

The combinations of zoom speeds are shown in the chart below.

Changing the ZOOM SPEED in the Menu

1)Set the Select Dial to any position except AUTO LOCK and press the MENU Jog Dial. The Menu Screen appears.

2)Rotate the MENU Jog Dial to move the highlight bar to “ZOOM SPEED”, then press it. The ZOOM SPEED Setting Menu appears.

3)Rotate the MENU Jog Dial to move the highlight bar to the desired speed and press it twice. The Menu Screen disappears and setting is completed.

Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby, lock the focus by using the manual focus (☞ pg. 27), then zoom in or out in Record mode.

EXIT

ZOOM SPEED Setting Menu

Zooming Speed ( 1 – 4 in order of speed)

“ZOOM SPEED”	Pressing the
in the Menu	Power Zoom Button
Screen
	fully	lightly
FAST	1 (fastest)	3
SLOW	2	4 (slowest)

: when the Select Dial is set to AUTO LOCK.