JVC TH-A25 manual Troubleshooting, Problem, Possible Cause, Solution

Page 48

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.

PROBLEM

Power does not come on.

The remote control does not work.

POSSIBLE CAUSE

The power cord is not plugged in.

It is too far from the center unit, or is not facing the center unit.

There is something obstructing the remote sensor.

The CONTROL TV button has been pressed.

The battery is flat.

The battery has been inserted the wrong way round (+/–).

Sunlight is falling directly on the detector.

SOLUTION

Insert the plug into the socket.

Come close to the center unit.

Avoid any obstacles.

Press DVD, FM/AM, or AUX to operate the system. (See page 42.)

Replace the battery.

Insert the battery correctly.

Shade the remote control from direct sunlight.

No sound.

Sound is emitted from only one speaker.

No video.

A disc cannot be played.

There is a short in the speaker cord.

The audio cord is not connected properly.

An incorrect source has been selected.

Muting is on.

The speaker cord is not connected correctly.

Left-right balance is incorrect.

The video cord is not connected properly.

TV input selection is incorrect.

The system and disc region code numbers are incompatible.

The disc causes the parental (rating) error.

Reconnect the speaker cord.

Connect the cord properly. (See page 9.)

Select the correct source. (See pages 10 to 14.)

Press MUTING to cancel muting.

Connect the cord properly. (See page 7.)

Adjust balance. (See page 15.)

Connect the cord properly. (See page 8.)

Select the correct input.

Replace the disc. (See page 19.)

Enter password to change the parental (rating) level. (See page 40.)

“WRONG DISC” appears on the display.

“NO DISC” appears on the display though a disc is inserted.

Video and audio are distorted.

The edge is missing on the video image.

An incompatible disc is loaded. (See page

Replace the disc.

 

 

19.)

 

 

 

 

 

 

 

 

 

The disc is dirty.

Clean the disc.

The disc is scratched.

Replace the disc.

 

 

 

 

 

The disc is dirty.

Clean the disc.

A VCR is connected between the center unit • Connect the center unit and TV directly. and the TV.

• Initial setup (TV screen size) is incorrect.

• Set TV screen size correctly.

 

(See page 37.)

Continuous static during FM broadcasts.

The system does not work correctly.

The received signal is too weak.

The station is too far away.

The antenna is not connected correctly.

Lightning or electronic noise interferes with operation of the microcomputer.

Immediately after beginning to heat the room, the unit was moved to a cold location causing condensation to form inside.

Connect an external FM antenna (see page 5), or contact your dealer.

Select another station.

Check the connection. (See page 5.)

Switch power off, and remove and re-insert the power plug in the socket.

When the system is not restored with the operation above, switch power off and press and hold 7 on the main unit for 5 seconds. The STANDBY lamp goes off for a moment and the microcomputer is reset*.

*This operation erases all the stored settings. Do not carry out this without necessity.

Switch power off and leave the unit a few hours before switching power on again.

44

Image 48
Contents TH-A25 If in Doubt Consult a Competent Electrician Important for Laser Products Above ALL Table of Contents Parts Identification Center UnitFront Panel DisplayRemote Control Remote ControlBefore Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Replace the coverConnecting the FM and AM Antennas FM antenna connectionAM antenna connection Speaker Layout Diagram Getting StartedConnecting the Speakers Connecting speaker cords to the speakersConnecting speaker cords to the center unit When setting the speakersConnecting Audio/Video Component Turn the power off to all components before connectionsTV connection Audio component connection VCRTurn On the Power Basic Disc OperationsLoad a Disc MutingStart Playback To turn off the sounds temporarilyTo activate Dolby Digital or DTS Digital Surround DVDBasic Disc Operations Basic Tuner Operations Select the BandTune into a Station Turning Off the Power with the Timer Adjusting the Display BrightnessOther Basic Operations Enjoying Sounds from the External ComponentUsing the Test Tone Adjusting the SoundCreating Realistic Sound Fields Press PL II repeatedly to activate all SpeakersBalance and the adjustment bar Appear on the TV screen Press 3 or 2 to adjust the output balance -00 to -06, OFFBasic sound adjustment procedure Creating Realistic Sound FieldsSurround Mode Introduction Dolby Digital and DTS Digital SurroundDolby Digital DTS Digital SurroundActivating the Surround Mode To activate Digital Multichannel SurroundTo activate Dolby Pro Logic II modes Plii MatrixIf appears on the TV screen when pressing a button, Disc Introduction-DVD/VCD/SVCD/CDDisc structure-DVD, Video CD VCD/SVCD and Audio CD CD Using the On-Screen Bar Disc PlaybackShowing the On-Screen Bar On ScreenPress on Screen Press 3 / 2 repeatedly to selectPress 5 / ∞ repeatedly to select Press EnterDisc Playback Selecting the Audio LanguagesPress 3/2 repeatedly to select Press 5/∞ repeatedly to select the desired languageSelecting the Playback Channel Selecting the Multi-Angle ViewsFor DVD For VCD/SVCD/CDDisc Menu-Driven Playback Press Menu or TOP MenuEnter Moving to a Particular Portion Directly Press 3/2 to select one of the icons belowPress the number buttons to Track, or playing timeRepeating Playback Press 5/∞ repeatedly to selectPoint Special Picture Playback Press Step once during playbackPress Step repeatedly to advance the picture frame by frame Press ZoomMP3/JPEG Introduction MP3/JPEG Playback Starting PlaybackInsert a disc Showing the On-Screen BarOperations Using the On-Screen Display MP3/JPEG PlaybackOn-screen display To start playback of the selected fileSelecting a Particular File/Folder Directly Browsing Pictures in the Current FolderPress Menu Press 3/2/5/∞ to select Desired picture, then pressTuning in Stations Tuner OperationsUsing Preset Tuning Selecting the FM Reception ModeUsing the RDS Radio Data System To Receive FM Stations What information can RDS signals provide?Tuner Operations Switching to a Selected Program Searching for a Program by PTY CodesDescription of the PTY codes Jazz musicSetting Up the DVD Preferences Setting the System PreferencesChoice Setting Up the DVD Preferences Setting the Preferences Press 5/∞ to select the desired settingBasic procedure to set up preferences Languages you can select on this menuPWD box to verify the password To change the passwordLevel, then press Enter BoxTo release the parental lock temporarily No Disc appears on the displayPress and hold 7 for more than 5 seconds Operating TV Control TVTV/VIDEO Maintenance Cleaning the unitGeneral Notes Handling DiscsTroubleshooting ProblemSolution Possible CauseSpecifications Amplifier sectionVideo section Tuner sectionTH-A25 DVD Digital Cinema System
Related manuals
Manual 96 pages 45.41 Kb

TH-A25 specifications

The JVC TH-A25 is a compact home theater system that combines innovative sound technologies with user-friendly features, making it an excellent choice for those looking to enhance their audio-visual experience at home. One of the standout aspects of the JVC TH-A25 is its impressive surround sound capabilities, which allow users to immerse themselves in a three-dimensional audio environment. This model features advanced audio processing technology designed to enhance the clarity and depth of sound, creating a cinematic experience right in your living room.

The system is equipped with a powerful subwoofer that delivers deep bass, enriching music and movie soundtracks alike. With a total output power of around 300 watts, the JVC TH-A25 ensures that the audio is loud enough to fill medium-sized rooms while maintaining sound quality. The presence of multiple audio channels allows for versatile speaker placement, enhancing the overall soundstage.

Another notable feature of the JVC TH-A25 is its compatibility with various audio formats. This system supports Dolby Digital and DTS decoding, meaning you can enjoy a wide range of movie and music formats without losing audio fidelity. Additionally, the built-in Bluetooth functionality enables users to stream music directly from their smartphones or other devices, offering convenience and modern connectivity options.

The design of the JVC TH-A25 is both sleek and stylish, fitting seamlessly into any home decor. The compact form factor of the speakers makes them easy to integrate into different setups without taking up much space. The intuitive remote control makes it easy to adjust settings, manage volume, and switch between input sources with ease.

Moreover, the setup process is straightforward, allowing users to get started with their home theater experience quickly. The simple wiring and clear user manual ensure that even those who are not tech-savvy can enjoy their new system without frustration.

In summary, the JVC TH-A25 is designed to deliver an engaging audio experience with its advanced surround sound technology, powerful bass, and modern connectivity features. Its compact design and user-friendly interfaces make it suitable for any home theater enthusiast looking to elevate their entertainment experience.