Jacuzzi Plumbing Product manual Water Connection, Adjustment a

Page 4
SUPPLY
SHANK
SUPPLY TUBE
1/2" SHUT-OFF VALVE

WATER CONNECTION

1.Before connecting the water supply, flush the line into a bucket to remove any debris.

2.Place the coupling nut, friction washer and universal washer onto the plain end of supply tube as shown.

NOTE: The same universal washer will be used to make the flanged slip-joint connection for a 1/2" O.D. or 3/8" flexible, or a 3/8" I.P.S. supply.

3. Temporarily make connection to tank supply shank, finger-tight. Mark at shut-off valve the tube length needed and add 1/4". (This will insert down into shut- off valve).

4.Remove supply tube and cut to length including the extra 1/4". Remove any burrs from inside the cut end. Slip compression nut and ring (ferrule) onto the shut-off valve end of the tubing.

5. Connect supply tube to supply shank once more and finger-tighten. Tubing may be pushed up into tank

supply to allow the extra 1/4" to be inserted into shut-off valve.

UNIVERSAL

WASHER

FRICTION

WASHER

COUPLING

NUT

COMPRESSION NUT

FERRULE

6.Tighten both the coupling nut at the tank and the compression nut at the shut-off valve. Make sure float valve does not rotate while tightening the coupling nut. The float ball must not contact the tank walls.

7.Turn on water supply and shut-off valve. Check for leaks. An additional tightening adjustment on leaking connections normally will stop the leak.

Adjustment (A)

1. WATER LEVEL IN TANK

Turn the water level adjustment screw clockwise to lower or counter-clockwise to raise the water level to the waterline mark on the tank.

2.TANK REFILL

Turn Flow Control screw clockwise to slow or counter-clockwise to speed-up the rate of tank fill.

NOTE: If either screw is turned clockwise too far, the float valve may not activate.

3. FLAPPER ADJUSTMENT

WATER LEVEL ADJUSTMENT SCREW

FLOW CONTROL SCREW

REFILL

TUBE

The length of the chain that connects the lever arm to the flapper may need to be adjusted. (Move the hook to another link)

A)TOO MUCH SLACK may not permit the flapper to lift far enough to properly activate the flush valve.

B)NOT ENOUGH SLACK in the chain may keep the flapper from closing properly.

3.REFILL TUBE

Make sure the refill tube is properly inserted in the top of the flush valve.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Gallon ONE Piece Toilet Tools and Materials Read and Follow ALL InstructionsSetting the Bowl Installing Your NEW ToiletRemoving Your OLD Toilet Adjustment a Water ConnectionTroubleshooting Adjustment BPoor Flush Float Valve does not Fully Shut OFFQUESTIONS? / PROBLEMS? Care and CleaningParts Limited Warranty Products Warranty PeriodLimited Warranty contd

Plumbing Product specifications

Jacuzzi has long been synonymous with luxury, comfort, and relaxation, and its plumbing products are no exception. Founded in the early 20th century, Jacuzzi has evolved into a premier brand known for its innovative solutions in the realm of home plumbing and wellness. This article will explore the main features, technologies, and characteristics that define Jacuzzi plumbing products.

One of the standout features of Jacuzzi plumbing products is their focus on user comfort and experience. For instance, the brand's whirlpool bathtubs are designed with strategically placed jets that provide a soothing massage effect, promoting relaxation and rejuvenation. This focus on ergonomics ensures that users enjoy not just a bath, but a spa-like experience in the comfort of their own homes.

Additionally, Jacuzzi products often incorporate advanced water-saving technologies without sacrificing performance. Water conservation is a growing concern, and Jacuzzi addresses this through features such as adjustable water pressure systems and efficient jet designs. These innovations allow users to enjoy luxurious baths while being mindful of their environmental impact.

Another significant characteristic of Jacuzzi plumbing products is the emphasis on durability and quality. Constructed with high-grade materials, these products are designed to withstand the test of time, maintaining their aesthetic appeal and functionality even after years of use. The brand offers a variety of finishes and styles, catering to diverse tastes and preferences, thereby ensuring that there is something for everyone.

Jacuzzi also prides itself on integrating smart technology into its offerings. With features like Bluetooth connectivity and digital controls, users can customize their bathing experience with ease. This technological innovation not only enhances user convenience but also allows for better energy management, as many products can be programmed to operate during off-peak hours to reduce energy consumption.

Moreover, Jacuzzi’s commitment to safety is evident in its plumbing products, which often come with slip-resistant surfaces and safety features that cater to families with children or elderly members. This focus on safety complements the brand's dedication to creating products that enhance quality of life.

In conclusion, Jacuzzi plumbing products are characterized by their luxurious features, advanced technology, durable construction, and a commitment to safety and water conservation. By marrying elegance with functionality, Jacuzzi continues to uphold its legacy as a leader in the plumbing industry, providing consumers with products that enhance their personal wellness and elevate their home environment. Whether it’s a tranquil bath or an invigorating shower, Jacuzzi remains a trusted name for those seeking the ultimate in plumbing solutions.
Top Page Image Contents