Playing Turntable

This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45, and 78 RPM records.

1)Set the PC-AUXswitch to PH position. Insert the PC-USB line into the Computer. Rotate the volume control to desert level.

2)Make sure that you have removed the stylus cover from the stylus and have released the Tone Arm Lock that secured the tone arm to the tone arm rest.

3)Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78 RPM. If you are playing 45 RPM singles , place the 45 RPM adapter on the centre spindle.

4)Place your record on the centre spindle.

5)Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to the edge of the record. The turntable starts automatically. Use the CUE lever to gently lower the tone arm onto the record.

6)When the tone arm reaches the end of the record it automatically returns to the tone arm rest and the record player stops.

7)To turn the system ‘off’ , switch the PH-AUX selector to the AUX

position.

NOTE: Do not turn or stop the turntable manually. Moving or jarring the Turntable without securing the Tone Arm clamp could result in damage to the Tone Arm.

IMPORTANT!!

TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION, A SILVER TRANSIT SCREW IS LOCATED AT THE UPPER RIGHT OF THE TURNTABLE PLATFORM.

BEFORE PLAYING, PLEASE USE A SCREWDRIVER TO TURN THE TRANSIT SCREW IN CLOCKWISE DIRECTION (SCREW GOING DOWN) COMPLETELY TO UNLOCK THE TURNTABLE.

TO LOCK THE TURNTABLE AGAIN FOR TRANSPORTATION,

PLEASE TURN THE SCREW IN COUNTER-CLOCKWISE

DIRECTION.