Invacare 9630E operating instructions Safety Summary, LEG Height Adjustment Figure

Page 1

All-In-One Commode

Assembly, Installation and Operating Instructions

Model No. 9630E

SAFETY SUMMARY

Thefollowingrecommendationsaremadeforthesafe installation of the Commodes:

WARNING

DO NOT install this equipment without first reading and understanding this in- struction sheet. If you are unable to un- derstand these instructions, contact a healthcare professional, dealer or tech- nical personnel if applicable before at- tempting to install this equipment - oth- erwise, injury or damage may occur.

Check all parts for shipping damage. In case of shipping damage, DO NOT use. Contact Dealer/Carrier for further instruction.

Snap buttons MUST be fully engaged and aligned in the proper height adjustment hole of each leg before use. This ensures that the legs are securely locked and an even height adjustment is achieved.

Make certain ALL screws, nuts and/or bolts are tight at all times.

Inspect rubber tips on the leg exten- sions for rips, wear or if they are miss- ing. Replace them immediately if any of these conditions exist.

Leg extensions with rubber tips MUST be in contact with the floor at all times.

Users with limited physical capabilities should be supervised or assisted when using the commode.

The Commode Model No. 9630E has a weight limitation of 135 kg.

LEG HEIGHT ADJUSTMENT (FIGURE 1)

1.Selectthedesiredheightforthecommodebyalign- ing the snap button of each leg extension with the appropriate adjustment hole in the leg frame.

2.Make certain that the snap buttons are fully en- gaged into the adjustment hole of each leg frame and are at the same height before using.

Snap Button

FIGURE 1 - LEG HEIGHT ADJUST-

MENT

INSTALLING AND REMOVING THE COMMODE SEAT AND LID (FIGURE 2)

CAUTION

Before removing/installingseat and lid, al- low seat/ring to reach room temperature if exposed to cold. This will help prevent the seat clamps from breaking when being re- moved/installed onto commode back frame rail.

1.Align the seat clamps of the toilet seat onto the back frame rail. (Each clamp should sit out- side the pail holders). Push down on seat until it clamps firmly into place.

2.Repeat the same process for the lid.

3.When removing the seat or lid, remove the lid first and then the seat. To remove, grasp the back corner of the lid and/or seat and lift up firmly.

CARE: Use a damp cloth and soap to clean.

NOTE: To make raising or lowering the seat/lid easier, you may lubricate the commode back frame rail with a very small amount of petroleum jelly or furniture polish.

WARNING

Toilet seat MUST be DOWN before sitting on the commode. Pail holders are NOT constructed to support the weight of an individual, ONLY the pail and its contents.

CAUTION

Back Tube Models -9630E; wing nuts must be inspected regularly for proper tight- ness. (Refer to Item No. 6 in Parts List).

1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents LEG Height Adjustment Figure Safety SummaryInstalling and Removing the Commode Seat and LID Figure Care Use a damp cloth and soap to cleanReplacing the Commode Armrests Figure Parts ListDescription QTY Achtung Einstellen DER VERSTELL- Baren Fusselemente AbbildungPflege Mit feuchtem Lappen und Seife reinigen Empfehlungen TeilelistePOS Benennung Menge Advertencias Pautas DE SeguridadAdvertencia RecomendacionesLista DE Piezas Sustitución DE LAS Gomas DE Reposa BrazoCant Consignes DE Sécurité Reglage DES Pieds Reglables SchemaAvertissements AvertissementListe DES Pieces Remplacement DES Accoudoirs SchemaRecommendations REP Designation QTÉ

9630E specifications

The Invacare 9630E is a highly regarded power wheelchair that exemplifies the brand's dedication to quality, comfort, and advanced technology. Designed for both indoor and outdoor use, this model caters to individuals with varying mobility needs by offering exceptional maneuverability and versatility.

One of its main features is its compact design, which allows users to navigate through tight spaces effortlessly, making it ideal for indoor environments like homes and apartments. The Invacare 9630E utilizes a robust chassis that provides stability and support while negotiating different terrains, ensuring a smooth ride regardless of the surface.

The wheelchair is equipped with powerful motors that deliver reliable performance at speeds of up to 5 miles per hour. This capability allows users to travel longer distances independently, enhancing their overall mobility experience. Additionally, the Invacare 9630E features advanced suspension systems that help absorb shocks, providing a comfortable ride even on uneven ground.

In terms of technology, the Invacare 9630E boasts an intuitive joystick control system that is responsive and easy to use. The joystick can be customized to suit individual preferences, accommodating different levels of ability and ensuring a seamless driving experience. Furthermore, the electronic components of the chair are designed for durability, reducing the need for frequent maintenance and ensuring long-term reliability.

Comfort is prioritized in the design of the Invacare 9630E. It features an adjustable seat that can be tailored to the user’s specific needs, providing optimal support throughout the day. The backrest is also adjustable, allowing users to find their preferred seating position.

Safety is paramount in the design of the Invacare 9630E, with features such as anti-tippers and secure harness systems that prevent accidental tipping and enhance overall security while in motion.

Overall, the Invacare 9630E combines innovative technology, user-friendly features, and exceptional comfort to provide an outstanding mobility solution. It is an excellent choice for anyone looking to enhance their independence and quality of life while enjoying the freedom to explore their environment.
Top Page Image Contents