Hunter Fan 20080902 Refilling The Water Tank, For Dadamage to Property Cauaused by Water Spillage

4.Lift the Main Housing to ensure the

Wick is properly seated, resting on the bottom of the base and not tilted or otherwise out of position. See Figure

3. Place the Main Housing back on the

Base.

7.Fill the Water Tank with water, return the Tank Fill Cap to its position and tighten it, and return the Water tank to the Base.

8.Plug the humidifier’s Power Cord into a standard household power outlet.

9.Turn the Power/Speed Control to your desired humidifier fan speed. See Figure 5.

Figure 3.

5.Grasp the Water Tank by its Tank Tote and remove it from the Base.

6.Turn the Water Tank upside-down and remove the Tank Fill Cap. See Figure 4.

Figure 4.

Figure 5.

Refilling The Water Tank

1.When the water tank level is low, turn the humidifier ‘OFF’, and unplug.

2.Remove the tank and take it to the sink or tub to refill.

3.Turn the tank upside down and unscrew the tank cap by turning it counterclockwise. Empty the tank, refill with fresh cool water (never use hot water), and replace the tank cap. Be sure not to overfill the tank as water damage may occur to furniture or flooring due to spillage. HUNTER WILL NOT ACCEPT RESPONSIBILITY

FOR DADAMAGE TO PROPERTY

CAUAUSED BY WATER SPILLAGE.

4.Carry the tank back to the humidifier. Turn the tank upright and place it on the humidifier. Be sure that the tank is seated properly in the base. If the tank is properly located on the base, you will see air bubbles flowing up into the tank.

©2008 Hunter Fan Company 5 43052-01 20080902