Hunter Fan 52107, 52105, 52106, 53237, 53236 Wiring, For a Single Switch, For Dual Switches

Wiring

M CEILI

O

N

R

G

F

M F

(Grounding)

O

A

R

N

F

Green/Yellow

Stripe

Using an orange wire

Stripe

Green/Yellow

connector from

the

hardware bag,

connect the 3 grounding

wires (green, green/

yellow stripe, or bare

copper) coming from the

ceiling, downrod, and

T

hanging bracket.

F

E

R

O

M

K

C

C

E

A

R

B

ILING

Note: To connect the wires,
hold the bare metal leads				M CEILI
together and place a wire
			O				N
		R						G
connector over them, then twist		F
clockwise until tight.
			(Grounded)			(Ungrounded)
	For a Single Switch		White		Blue	Black
	Using the orange wire
	connectors from
the	hardware bag, connect
the black wire (ungrounded)
from the ceiling to the black
and the blue wires from the
fan. Connect the white wire
(grounded) from the ceiling to
the white wire from the fan.
			F			A
			R
					OM F		N

www.HunterFan.com 1.888.830.1326

				M		C
							EILI
			O						N
		R								G
		F
For Dual Switches		(Grounded)			(Ungrounded)					(Ungrounded)
Using the orange wire
connectors from
the	hardware bag,
connect the white wire		e
(grounded) from the
		Whit
ceiling to the white wire					Blue					Black
	from the fan.
Connect the black wire
(ungrounded) from the
ceiling to the black wire
from the fan. Connect the
second (ungrounded) wire
from the ceiling to the blue
wire from the fan.
			F					A
				R
					OM F				N

Refer to CAUTION c.1 on pg. 2

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box.

10

M0042-01 • 01/29/14 • © Hunter Fan Company