Finish Hanging Fan | Hunter Fan 41597-01 guide

IMPORTANT! Before installing this control make sure the position of the dip switches of the transmitter and receiver are matched. If they are not matched, the control will not function.

Select different combinations of dip switches for each fan instal- lation in the house to prevent interference of one control with another. See Figure 6.

IMPORTANT! When you change dip switches, make sure the battery is not connected to the transmitter.

	DIP		DIP
SWITCHES		SWITCHES

TRANSMITTERRECEIVER

FIGURE 6

A. Install a fresh 9-volt battery into the transmitter (battery not supplied).

Place the receiver inside the canopy. First make sure the oval shaped holes in the bottom of the receiver and dip switches are facing down, toward the bottom of the canopy. Spread the receiver lead wires to each side and feed the wires from the top of the fan through the open slot in the receiver. Now place the receiver into the canopy making sure the slot in the receiver is aligned with the hook in the ceiling plate. When properly installed the hook in the ceiling plate will fit inside the open slot of the receiver. If the hook and slot do not line up with each other, rotate the receiver until the two parts align. The canopy can not be attached to the ceiling plate unless the hook is posi- tioned in the receiver slot.

CEILINGRECEIVER

CANOPY PLATE

FAN

ANTENNA	HOOK

CANOPY

FIGURE 6A

B. Connect electrical supply leads from the motor, using approved connectors. Connect the yellow from the fan to the yellow from the receiver, pink from the fan to the pink from the receiver, grey from the fan to the grey from the receiver and the black with white tracer from the fan to the black with white tracer from the receiver.

Connect the red and white wires from the fan with the white from the receiver to the white power (common) wire. Connect the larger black wire from the receiver to the black power wire.

Run the thin white antenna wire from the receiver through one of the slots in the ceiling plate and outside the canopy (when installed). See Figure 6A.

Connect the ground wire to the green lead wires from the ceiling plate and the hanger ball.

After wiring is completed, check all connections to ensure that they are tight and there are no bare wires visible at the wire connectors.

CAUTION: No bare wire or wire strands should be visible after making connections.

C. After making the wire connections, the wires should be spread apart with the white and green wires on one side of the outlet box and the other wires on the other side of the outlet box.

The splices should be turned upward and pushed carefully into the outlet box.

Step 7: Finish Hanging Fan

A. The ceiling plate has (3) mounting screw holes located on the side. Install (2) #10-32 x 1/2” Phillips round head screws halfway into two of these holes. See Figure 7.

Remove the fan from the ceiling plate hook. Make sure not to break any wire connections. The canopy has (2) mating slots and (1) mating hole. See Figure 7.

B. Position (2) slots in canopy directly under and in line with

(2)mounting screws in ceiling plate. Lift fan until ceiling plate mounting screws are seated in bottom of slots in canopy. Rotate fan counterclockwise until both mounting screws drop into slot recesses. Tighten screws securely. Install third screw in mount- ing hole.

CAUTION: Failure to properly tighten the (3) screws could result in the fan falling.

NOTE: For the ball hanging fan configuration make sure the (2) grooves in the ball are engaged with the (2) tabs in the canopy.

Failure to do so could result in the fan falling. See Figure 5C.

CEILING PLATE

MOUNTING SCERW

MOUNTING HOLE

CANOPY

MOUNTING RECESS

FIGURA 7

41597-01 12/21/2002

41597-01 specifications

The Hunter Fan 41597-01 is a remarkable ceiling fan that blends traditional style with modern technology, making it an ideal choice for enhancing both aesthetics and comfort in your home. With a sleek design and a range of impressive features, this ceiling fan is perfect for any room, from cozy living spaces to larger areas.

One of the key characteristics of the Hunter Fan 41597-01 is its elegant finish, typically available in rich wood tones or contemporary metallic options. This versatility allows it to complement various interior design themes, from rustic to modern. The fan's blades are engineered for optimal airflow, ensuring effective circulation while maintaining a quiet operation, which is essential for a peaceful home environment.

The Hunter Fan 41597-01 comes equipped with WhisperWind motor technology. This innovative feature guarantees powerful airflow without the distracting noise often associated with conventional ceiling fans. This makes the fan ideal for bedrooms or spaces where tranquility is a priority, allowing you to enjoy a comfortable climate without disruption.

Another standout feature is the fan's energy efficiency. Equipped with LED light kits, it provides illumination while consuming less power compared to traditional bulbs. This not only contributes to lower energy bills but also aligns with eco-friendly initiatives, making it a responsible choice for energy-conscious homeowners.

In addition to its aesthetic appeal and energy efficiency, the Hunter Fan 41597-01 offers versatile speed settings. With multiple speeds to choose from, you can customize airflow according to your needs, whether you need a gentle breeze or a stronger draft during warmer months. The fan's reversible motor also allows for year-round use; during summer, it can create a cooling downdraft, while in winter, it can be reversed to circulate warm air trapped at the ceiling level.

Installation is made easy with the fan's user-friendly mounting system, which accommodates various ceiling heights. This adaptability ensures that the Hunter Fan 41597-01 can be installed in almost any room without complications.

The Hunter Fan 41597-01 also often includes smart home compatibility, allowing you to control it remotely via smartphone or voice commands when paired with compatible systems. This feature adds an extra layer of convenience, making it easier than ever to maintain your desired comfort levels throughout the day.

In summary, the Hunter Fan 41597-01 stands out due to its sophisticated design, advanced motor technology, energy efficiency, adjustable speed settings, easy installation, and connectivity options. It's a perfect blend of style and functionality, making it a worthy addition to any home.