Installation of Ceiling Plate, Hanging Fan

Step 4: Installation of Ceiling Plate

A. Install the (3) rubber bushings into the top of the ceiling plate by inserting small side of the bushing into the three holes in the ceiling plate. See Figure 4A.

B. Thread the lead wires through the opening in the ceiling plate and install the ceiling plate to the 2 x 4 brace which sup- ports the outlet box. Use (2) #10 woodscrews 3" long and (2) flatwashers for mounting. Drill (2) pilot holes for the mounting screws 9⁄64" diameter. See Figure 4B.

NOTE: When attaching ceiling plate to the outlet box support, make certain bushings remain in place.

NOTE: Tighten the ceiling plate mounting screws only enough to provide slight compression of the bushings. Do not over- tighten.

BUSHING

CEILING PLATE

FIGURE 4A

2 x 4 BRACE

OUTLET BOX

CEILING PLATE

FLAT WASHER

MOUNTING SCREWS

FIGURE 4B

NOTE: Assembly Methods for

Installer’s Choice Hanging System

Your new Hunter fan can be hung in (2) different manners, one being as a low profile fan and also as a ball type hanging fan. Thus, installer’s choice. Customer should read Steps 5 through 7 and decide which style of mounting to use.

Step 5: Fan Assembly Low Profile Fan

A. The canopy has (4) holes in the bottom. The large center hole fits over the adaptor on top of the fan. The (3) remaining holes are for the canopy assembly screws.

SCREWS WITH

LOCKWASHERS

AND LOCTITE ON

THREADS

CANOPY

ADAPTOR SCREW HEAD

SCREW HOLE

FAN ASSEMBLY

FIGURE 5

Place the canopy on top of the fan and align the proper holes. See Figure 5. Make certain you have located the hole pattern by checking to see that the canopy sits flat on top of the fan with- out a space between the bottom of the canopy and the top of the fan. If a space is present, rotate the canopy slightly, eliminating the space.

B. Next, secure the canopy to the top of the fan using (3) #10- 32 screws with lockwashers packaged with the adaptor kit. Make certain the screws are tight. Failure to do so could result in the fan falling.

CAUTION: To ensure proper engagement of the canopy assem- bly screws, the canopy must fit snug against the top of the fan.

CAUTION: Do not lift motor by wires.

C. Being careful not to scratch the canopy finish, hang the fan from the hook in the ceiling plate using one of the (2) slots in the canopy. See Figure 5A.

CEILING PLATE

HOOK

CEILING PLATE

GROUND WIRE

CANOPY

FIGURE 5A

Hanging Fan

CAUTION: Do not lift motor by wires.

A. Insert pipe nipple through canopy and feed wires from top of motor through pipe nipple. Screw pipe nipple into fan until tight (at least 41⁄2 turns). The setscrew locking the pipe nipple to motor must be tightened very securely. See Figure 5B. Failure to tighten screw could result in fan falling.

CAUTION: The pipe nipple has a special coating on the threads. Do not remove. The coating is to help prevent the nip- ple from unscrewing.

B. Being careful not to scratch the canopy finish, hang the fan from the hook in the ceiling plate using one of the (2) slots in the canopy. See Figure 5A.

NOTE: For mounting fan on vaulted ceiling, there are (2) sets of holes on the side. Locking tab in side must be in up position. Use set of holes in ceiling plate that assures locking tab in canopy is in the up position.

	LEAD WIRES
	6” MIN
	PIPE NIPPLE BALL
	CANOPY
	PIPE NIPPLE
MOTOR	PIPE NIPPLE
	SETSCREW
	(TIGHTEN
	SECURELY)

FIGURE 5B

40955-01 1/91

-2-

40955-01 specifications

The Hunter Fan 40955-01 is a notable ceiling fan designed to enhance both functionality and aesthetics in any space. Renowned for its classic yet modern design, this ceiling fan fits seamlessly into various home environments, from contemporary to traditional settings.

One of the standout features of the Hunter Fan 40955-01 is its powerful motor, which delivers exceptional airflow while maintaining quiet operation. The fan is equipped with a WhisperWind technology, ensuring that it can circulate air without the disruptive noise that often accompanies other high-performance fan models. This makes it an ideal choice for bedrooms, living rooms, or any area where a peaceful atmosphere is desired.

The fan boasts five sleek blades crafted from high-quality materials, ensuring durability and longevity. These blades are designed with an aerodynamic shape to maximize airflow efficiency, contributing to a comfortable home climate throughout the year. The blade pitch and size are thoughtfully engineered to provide optimal air circulation, making it effective in both cooling and providing warmth in winter months.

In terms of design, the Hunter Fan 40955-01 features a timeless finish that complements any decor. Available in various color options, including bronze and brushed nickel, it can easily match different interiors. The fan's elegant silhouette adds a touch of sophistication to ceiling spaces, elevating the overall ambiance.

Technology is also a significant aspect of this fan. It includes a convenient remote control, allowing users to operate the fan's speed and light settings from anywhere in the room. This added convenience is perfect for those who want a tailored climate without the need to get up frequently. Additionally, the fan is compatible with smart home systems, allowing for app-based control and integration with other smart devices.

Installation of the Hunter Fan 40955-01 is straightforward, thanks to its user-friendly design and included instructions. The fan is versatile and can be mounted in various orientations, including flush-mounted or standard mount, depending on the user's needs.

Overall, the Hunter Fan 40955-01 brings together style, functionality, and innovative technology, making it an excellent choice for anyone seeking to improve the air circulation and aesthetics of their living space.