5 • Installing the Canopy and Canopy Trim Ring
5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.
5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy.
5-3. Twist canopy clockwise to secure.
Steps 5-1 – 5-2 | Hanger Bracket |
5-4. Install third & fourth canopy screw in round hole on canopy. Securely tighten all four screws.
5-5. Using both hands, push the canopy trim ring up to the top of the canopy.
5-6. Twist canopy trim ring clockwise to secure the canopy.
Should you need to remove the canopy trim ring, follow these steps:
1.Twist canopy trim ring counter clockwise until it releases from canopy.
45003-01 • 07/02/2009 • Hunter Fan Company
