Hunter Fan 42749-01 warranty Installing the Canopy and Canopy Trim Ring

5 • Installing the Canopy and Canopy Trim Ring

5-1. Holding the canopy, raise the fan off the hook.

5-2. Align the slots in the canopy with the tabs on the ceiling plate.

5-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy.

5-4. Partially install the three canopy screws into the canopy one at a time. Once all three screws are in, tighten them.

5-5. Using both hands, push the canopy trim ring up to the top of the canopy. The canopy trim ring will snap and lock into place.

Should you need to remove the canopy trim ring, follow these steps:

1.Locate the tab indicators, small bumps on top of tabs.

2.Press firmly on opposite sides of the ring towards the canopy. The tabs will flex out releasing the trim ring from the canopy.

Step 5-2 Ceiling Plate

Canopy	Canopy Trim
	Ring

Step 5-3

Steps 5-4 – 5-5

Canopy Screw



42749-01 • 05/04/07 • Hunter Fan Company