Cut the Ceiling Hole, Install the Outlet Box

Preparing the Fan Site (continued)

Step 2 - Cut the Ceiling Hole

2-1. Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan.

2-2. Cut a 4” diameter hole through the drywall or plaster of the ceiling. You will use the hole to install the support brace and outlet box.

Step 3 - Install a Support Brace, If Necessary

Determine if there is a ceiling joist directly above the ceiling hole. If the joist is there, determine if it is positioned to allow you to recess the outlet box a minimum of 1/16” into the ceiling. If NOT, install a support brace as follows:

3-1. Attach a 2” x 4” support brace between two joists. Position it to allow you to recess the bottom of the outlet box a minimum of 1/16” into the ceiling.

3-2. Check the support brace to ensure it will support the full weight of the fan and light kit.

Step 4 - Install the Outlet Box

4-1. Obtain a UL-approved octagonal 4” x 1-1/2” outlet box, plus two #8 x 1-1/2” wood screws and washers, available from any hardware store or electrical supply house.

4-2. Orient the outlet box so that both the inner and outer holes in the box align with the joist or support brace.

4-3. Drill pilot holes no larger than the minor diameter of the wood screws (5/64”) through the inner holes of the outlet box.

4-4. Attach the outlet box directly to the support brace or joist with two #8 x 1-1/2” wood screws and washers. h e bottom of the outlet box must be recessed a minimum of 1/16” into the ceiling.

Step 5 - Prepare the Wiring

5-1. Make sure the circuit breakers to the fan supply line leads and associated wall switch location are turned off . If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

5-2. hread the fan supply line through the outlet box so that the fan supply line extends at least 6” beyond the box.

5-3. Attach the fan supply line to the outlet box with an approved connector, available at any hardware store or electrical supply house.

5-4. Make certain the wiring meets all national and local standards and ANSI/NFPA 70..

You have now successfully prepared your ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the

Ceiling Plate.

Steps 2 – 3

Step 4

Step 5

CAUTION: All wiring must be in

accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a

qualified electrician.

42857-01 • 02/17/10 • Hunter Fan Company

42857-01 specifications

The Hunter Fan Company has long been a leader in crafting ceiling fans that seamlessly combine functionality with aesthetic appeal, and the Hunter Fan 42857-01 model exemplifies this commitment to quality and design. This fan is engineered to enhance the comfort of your living space while providing a stylish accent to your home decor.

One of the standout features of the Hunter 42857-01 is its powerful yet quiet motor. Equipped with a WhisperWind motor, this fan offers exceptional performance that delivers a strong airflow without the disruptive noise often associated with ceiling fans. This silent operation makes it suitable for any room, whether you want to cool down your living area, bedroom, or home office.

The Hunter 42857-01 flaunts a sleek contemporary design, featuring a modern finish that complements various home styles. Its blades are crafted from high-quality materials that ensure longevity while delivering a stylish look. The fan boasts a five-blade configuration, which not only enhances its aesthetic appeal but also optimizes airflow circulation throughout the room.

This model also showcases versatile mounting capabilities, allowing for standard, low-profile, and angled installations. This adaptability makes it an excellent choice for any room layout, ensuring that it fits perfectly in your desired space while maintaining optimum performance.

Another notable technology featured in the Hunter 42857-01 is its compatibility with smart home systems. This connectivity allows homeowners to control their fan from anywhere, providing convenience and flexibility through compatible wireless options, such as mobile apps or smart home devices.

With its Energy Star rating, the Hunter 42857-01 is an eco-friendly choice for consumers looking to minimize their energy consumption. This attribute helps reduce electricity bills while promoting environmental sustainability, making it a responsible addition to any home.

Lastly, the installation process for the Hunter 42857-01 is user-friendly. The fan comes with a comprehensive manual and all necessary hardware, making it a hassle-free experience for customers, even those with limited DIY skills.

In summary, the Hunter Fan 42857-01 represents a blend of modern design, efficient technology, and user-friendly features. With its whisper-quiet motor, attractive aesthetics, energy-saving capabilities, and smart home compatibility, it is an excellent choice for anyone looking to enhance their living environment with a functional and stylish ceiling fan.