Hunter Fan 42406-01 installation manual Single Switch Wiring, From the fan, Dual Switch Wiring

Step Title 4 • Wiring the Fan

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes.

4-1. Make sure the power to the outlet box and associated wall switch location is still OFF.

To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist the wire connector clockwise until tight.

CAUTION: Be sure no bare wire or wire strands are visible after making connections.

Wire connector

Single Switch Wiring

Single Switch Wiring:

If you want to, you can control both fan and light with one switch. To do so connect the wires as follows:

7	• The bare or green ground wire from the ceiling to the green
	ground wire from the ceiling plate and the green ground wire
	from the fan

•The white wire from the ceiling to the white wire from the fan

•The black wire from the ceiling to the black and the black/white

wire from the fan	Dual Switch Wiring
Dual Switch Wiring:
• The bare or green ground wire from the ceiling to the green
ground wire from the pipe ball assembly
• The white wire from the ceiling to the white wire from the fan
• The black wire from the ceiling to the black wire from the fan
• The black/white wire from the fan to the wire for the wall switch
4-2. Push all wires and wire connectors into the outlet box.
Hunter Fan Company	42406-01 • 20080926