Hunter Fan 42654-01 Operating and Cleaning Your Ceiling Fan, To Change Airflow Direction

Page 15

9 • Operating and Cleaning Your Ceiling Fan

9-1. Turn on electrical power to the fan.

9-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off.

Pull the chain slowly to change settings.

Release slowly to prevent the chain from recoiling into the blades.

The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector.

9-3. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a draft.

9-4. For cleaning finishes, use a soft brush or lint-free cloth to prevent scratching. A vacuum cleaner brush nozzle can remove heavier dust. Remove surface smudges or accumulated dirt and dust using a mild detergent and a slightly dampened cloth. You may use

an artistic agent, but never abrasive cleaning agents as they will damage the finish.

9-5. Clean wood finish blades with a furniture polishing cloth. Occasionally, apply a light coat of furniture polish for added protection and beauty. Clean painted and high-gloss blades in the same manner as the fan finish.

In warm weather, use downward air flow pattern

In cold weather, use upward air flow pattern

To Change Airflow Direction

Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan.

Reversing

Switch

15

42654-01 • 03/08/10 • Hunter Fan Company

Image 15
Contents Type 2 Models Welcome Checklist for Existing Fan Site Choose the Fan SiteChoose a fan site where Cut the Ceiling Hole Install a Support Brace, If NecessaryInstall the Outlet Box Prepare the WiringConsidering Optional Accessories Understanding Mounting and Installer’s ChoiceChecking Your Fan Parts Installing Multiple Fans?Getting Ready Gathering the ToolsFlat Washer Wood Screw Toward Ceiling Peak Installing the Ceiling PlateHanging the Fan Assembling and Hanging the FanFor Standard or Angled mounting For Low Profile mountingSecuring Fan to Secondary Support System Wiring the Fan Dual Switch WiringSingle Switch Wiring Installing the Canopy and Canopy Trim Ring Assembling the Blades Steps 8-1 Steps 8-7 To Change Airflow Direction Operating and Cleaning Your Ceiling FanProblem Excessive wobbling TroubleshootingProblem Nothing happens fan does not move Problem Noisy operation