Radio Shack DX-396 owner manual Setting the AM/FM Tuning Increment, Setting the Secondary Clock

•When the receiver is off, the display always shows local time. When the receiver is turned on, the time disap- pears and a radio frequency appears. To see the time when the receiver is on, press CLOCK. Press CLOCK again to return to the radio frequency display.

returns to the primary clock time or the radio frequency display (when the receiver is on).

To return to the primary clock or radio frequency display before 10 seconds have passed, press DUAL TIME again.

Setting the Secondary Clock

Follow these steps to set the secondary clock.

1.Press POWER, then press DUAL TIME. WORLD TIME appears.

2.Press TIME SET. The hour digit and WORLD TIME flash for 10 seconds.

3.While the display flashes, use the number keys to enter the hour for the secondary clock. Or, press > to advance the hour or < to set it back.

Notes:

•The minutes change automatically, according to the primary clock set- ting.

•If the clock is in 12-hour format and you press > or < to set the hour, PM automatically appears on the dis- play. If you use the number keys to enter the hour, press AM/PM to note the time is PM.

4.Press TIME SET again to set the secondary clock.

To see the secondary clock time, press DUAL TIME. The display shows the time and WORLD TIME for 10 seconds, then automatically

SETTING THE AM/FM TUNING INCREMENT

You can set the AM/FM tuning incre- ment to the correct frequency used in other countries as you travel.

1.Slide the battery compartment cover in the direction of the arrow and remove the cover.

2.Remove any batteries from the com- partment.

3.To easily receive broadcasts when you travel to other countries, set A/B to A.

To easily receive broadcasts at home, set A/B to B.

For example, 10 kHz is used in North and South America, while 9 kHz is dominant in Europe.

4.Replace the batteries.

5.Replace the cover.

8