Hunter Fan 45018 warranty Wiring the Fan, Dual Switch Wiring, Single Switch Wiring

Page 9

4 •Wiring the Fan

Wiring

codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a

All wiring must be in accordance with national and local electrical

 

qualified electrician.

&

Bracket

4-1. Before attempting installation, make sure the power is still off.

Wall switches are not included. Select an acceptable general-use switch

 

in accordance with national and local electrical codes.

Install

4-2. To connect the wires, hold the bare metal leads together and place

 

a wire nut over them, then twist clockwise until tight. For all these

 

connections use the wire connectors provided.

 

4-3. Connect the bare or green ground wire (grounded) from the

 

ceiling to the green ground wire (grounded) from the ceiling plate

 

and the green ground wire from the fan.

 

4-4. Connect the white wire (ungrounded) from the ceiling to the

 

white wire (ungrounded) from the fan.

 

4-5. Connect the remaining wires as follows:

Wire

Dual Switch Wiring:

Connector

 

•The black wire (ungrounded) from the ceiling to the black wire

(ungrounded) from the fan

•The black/white wire (ungrounded) from the fan to the wire

(ungrounded) for the wall switch

Single Switch Wiring:

•The black wire (ungrounded) from the ceiling to the black

(ungrounded) and the black/white wire (ungrounded) from the fan

CAUTION: Be sure no bare wire or wire strands are visible after making connections.

4-6. Turn the wire connectors upward and push them carefully back through the ceiling plate into the outlet box.

4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box.

8

45018-01 • 01/29/08 • Hunter Fan Company

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Type 2 Models Installation is complete Welcome Installer’s Choice and Optional Accessories Getting Ready Installing Multiple Fans?Install Bracket & Wiring Installing the Hanger BracketGo to 4 Wiring the Fan Assembling and Hanging the FanRaise the fan and place the ball into the hanger bracket Assembling and Hanging the Fan Low Profile Only Fan assemblyRemove the screws from the hanger ball bracket Assemble securely with three #8-32 x 3/4 screwsDual Switch Wiring Wiring the FanSingle Switch Wiring Black wire ungrounded from the ceiling to the blackBracket & Wiring Installing the Canopy and Canopy Trim RingAssembling the Blades Close OpenInstall Bulbs & Glass Uninstalling the Light Fixture Operating and Cleaning Your Ceiling Fan Turn on electrical power to the fanTo Change Airflow Direction Problem Nothing happens fan does not move TroubleshootingProblem Noisy operation Problem Excessive wobbling

45018 specifications

The Hunter Fan 45018 is a meticulously designed ceiling fan that combines aesthetics, functionality, and efficiency to enhance any living space. Known for its robust construction and sophisticated design, this fan is ideal for both residential and commercial settings. One of the notable features of the Hunter Fan 45018 is its powerful motor, which operates quietly, ensuring a peaceful environment while providing an impressive air circulation rate.

This model comes with a stylish integrated light kit that not only illuminates the surroundings but also adds to the overall decor of the room. The light kit is compatible with LED bulbs, which are energy-efficient and long-lasting, providing savings on electricity bills and reducing the frequency of bulb replacements. This attention to energy efficiency reflects Hunter's commitment to sustainability and environmentally friendly solutions.

The Hunter Fan 45018 is designed with versatility in mind. It features several speed settings, allowing users to customize the airflow according to their comfort needs. The reversible motor functionality enables users to change the direction of the fan blades, ensuring warmth is distributed evenly during winter months while circulating cool air in the summer. This adaptability makes it a year-round solution for optimal home climate control.

In terms of installation, the fan is designed to be user-friendly, with clear instructions that make the setup process straightforward. It is suitable for various room sizes, enhancing spaces from bedrooms to larger living areas. Additionally, the fan comes with a variety of finishes and blade options, enabling homeowners to select the ideal match for their interior decor style.

Installation flexibility is another highlight, as the Hunter Fan 45018 can be mounted flush to the ceiling in lower rooms or hung from a downrod in spaces with higher ceilings. This versatility ensures that the fan suits a wide range of ceiling heights and designs.

Overall, the Hunter Fan 45018 is a remarkable blend of style, technology, and practicality, making it an excellent choice for those looking to enhance their indoor environment. With its quiet operation, energy efficiency, and customizable features, this ceiling fan stands out as a premium option in today's competitive market. Whether for comfort, design, or efficiency, the Hunter Fan 45018 delivers on all fronts.
Top Page Image Contents