You can assemble your fan for standard or angle mounting as shown in steps 3-1 – 3-6 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-7 – 3-11 on this page.
3-7. Locate the washer that comes preassembled in the canopy. Remove the label and discard the washer and label. Locate the set screw preassembled in the adapter. Remove and discard the set screw. (Refer to images on previous page.)
3-8. Place the low profile washer from the parts sack into the canopy.
3-9. Place the canopy trim ring and canopy with washer on top of the fan assembly.
3-10. Align the screw holes in the washer with the holes in the adapter. Assemble securely with three #8-32 x 1/2” screws.
3-11. Raise the fan and place the hook on the hanger bracket through the round hole in the rim of the canopy.
WARNING: Fan may fall if not assembled as directed in these installation instructions.
