Hunter Fan 21958 installation manual Installing the Canopy

Page 10

5 • Installing the Canopy

5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.

5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy.

5-3. Twist canopy counterclockwise to secure.

5-4. Install third canopy screw in round hole on canopy. Securely tighten all three screws.

Steps 5-1– 5-3

Canopy

Steps 5-4

Mounting Screw

42863-01 • 06/22/11 • Hunter Fan Company

Image 10

Contents Type 5 Models Table Of Contents WelcomeChoose the Fan Site Checklist for Existing Fan SitePreparing the Fan Site Choose a fan site wherePrepare the Wiring Install a Support Brace, If NecessaryInstall the Outlet Box Cut the Ceiling HoleUnderstanding Mounting and Installer’s Choice Installer’s Choice and Optional AccessoriesConsidering Optional Accessories Gathering the Tools Installing Multiple Fans?Getting Ready Checking Your Fan PartsInstalling the Ceiling Plate For Angled Ceilings Be sure toAssembling and Hanging the Fan For Standard or Angled mountingDual Switch Wiring Wiring the FanSingle Switch Wiring Installing the Canopy Assembling the Blades Motor to secure shipping blocksCompleting Your Installation Operating and Cleaning Your Ceiling Fan To Change Airflow DirectionBeat the High Cost of Cooling Save Energy and Money While Protecting the EnvironmentProblem Noisy operation TroubleshootingProblem Nothing happens fan does not move Problem Excessive wobbling