Hunter Fan 21322 installation manual Installing the Hanger Bracket, Middle of the hanger bracket

Page 5

2 • Installing the Hanger Bracket

CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64” in diameter.

2-2. Partially install two canopy screws in the holes on each end of the hanger bracket, as shown in the figure to the right.

Hanger

 

Bracket

 

Canopy

 

Screw

Step 2-2

 

Canopy Screw

2-3.

Your fan comes with four mounting isolators. Position the

 

 

isolators between the hanger bracket and ceiling by inserting the

 

 

raised areas on each isolator into the holes in the hanger bracket.

Isolator

 

 

2-4.

Thread the lead wires from the outlet box down through the hole

 

 

in the middle of the hanger bracket.

Step 2-3

2-5.

Align the slotted holes in the hanger bracket with the pilot holes

 

 

you drilled in the wood support structure.

 

 

Note: The isolators should be flush against the ceiling.

 

2-6.

Place a flat washer on each of the two 3” wood screws and pass

 

 

the screws through the slotted holes in the hanger bracket into

 

 

the pilot holes you drilled.

 

 

Tighten the screws into the 9/64” pilot holes; do not use lubricants

 

 

on the screws. Do not over tighten.

 

 

Flat Washer

 

 

3” Wood Screw

 

 

 

Steps 2-4 – 2-6

5

42857-01 • 12/04/08 • Hunter Fan Company

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Type a Models Disconnect the power by turning off the circuit breakers to Use only Hunter replacement partsUse only the hardware supplied Qualified electricianMounting and Optional Accessories Getting Ready Installing Multiple Fans?Your fan comes with four mounting isolators. Position Installing the Hanger BracketMiddle of the hanger bracket You drilled in the wood support structureAssembling and Hanging the Fan Connect the wires as follows Wiring the FanPlace the fan housing over the motor Installing the Motor HousingAssembling the Blades Housing Assembly Upper Screw Switch Steps 7-6 Installing the Glass Bowl Uninstalling the Light Fixture Turn on electrical power to the fan Operating and Cleaning Your Ceiling FanProblem Nothing happens fan does not move TroubleshootingProblem Noisy operation Problem Excessive wobbling

21322 specifications

The Hunter Fan 21322 is a striking ceiling fan that combines aesthetic appeal with advanced functionality, making it a notable addition to any space. This ceiling fan is designed with quality and performance in mind, catering to both style-conscious homeowners and those seeking efficient air circulation.

One of the standout features of the Hunter Fan 21322 is its powerful motor, which is engineered to provide consistent and reliable airflow. The fan operates quietly, ensuring that it does not disrupt the ambiance of your room, whether it’s a living room, bedroom, or office. With reversible motor technology, the fan allows users to choose the direction of airflow, promoting a cooling breeze in the summer and warm air circulation in the winter.

The design of the Hunter Fan 21322 is versatile, showcasing a contemporary style that can complement various interior decors. It typically comes with elegant blades that not only contribute to its visual appeal but also enhance its performance. The fan's finishes are available in multiple colors, allowing homeowners to select the perfect match for their existing furnishings.

Additionally, the Hunter Fan 21322 incorporates an energy-efficient design. With an emphasis on sustainability, this ceiling fan uses minimal electricity while still providing excellent airflow, making it an eco-friendly choice. This fan is compatible with LED bulbs, offering further energy savings compared to traditional lighting options.

Installation is straightforward with the Hunter Fan 21322, thanks to its user-friendly instructions and included mounting hardware. The fan is designed for easy access to the light kit and blades for maintenance, ensuring that it remains in pristine condition over time.

Moreover, the fan can often be paired with advanced technologies like smart home integration, allowing users to control it via smartphones or smart home devices for added convenience. This feature is appealing for those who appreciate modern technology in their home environment.

In summary, the Hunter Fan 21322 stands out as a reliable, stylish, and energy-efficient ceiling fan. With its powerful motor, reversible airflow, appealing design, and compatibility with modern technologies, it represents a well-rounded choice for anyone looking to enhance their living space while maintaining comfort and efficiency.
Top Page Image Contents