Installing the Glass Bowl

7 • Completing Your Installation With a Bowl Light Fixture (Continued)

7-3. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.

7-4. Attach the extra pull chains (included) to the fan pull chain and light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)

7-5. Thread the pull chains through the holes in the metal disc. Then, thread the pull chains through the hole in the center of the glass bowl.

7-6. Thread the pull chains through the grommet holes on the sides of the cover plate.

7-7. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.

7-8. Screw the finial onto the threaded rod end until tight.

Breakaway

Connector

Metal Disc

Threaded

Rod

Glass Bowl

Cover Plate

Finial

Light Bulbs

(B10

Candelabra

Base 60 Watt

Maximum)

Grommet Hole

45025-01 • 11/19/08 • Hunter Fan Company