Assembly and Instructions for Use

•The electrical cord of this product cannot be replaced. If it sustains damage, you must stop using the appliance immediately and return it to the HoMedics Service Center for examination and repair. (See the warranty section for HoMedics address).

•Disconnect the appliance from the electrical outlet before putting hands into water.

1.Remove all contents from packaging and inspect to make sure all components have been received (Fig. 1):

•Base with attached electrical cord and water pump

•Fountain top

•A/C Adapter

2.Wipe any dust off the interior and exterior of the base and top.

3.Familiarize yourself with the pump. The pump speed is controlled by the dial located at the front of the pump. The speed is indicated by a “min” and “max”. To increase the speed, move the dial clockwise in the direction of the “max”. At its highest speed level, the dial will cease to move any further. To decrease the pump speed, move the dial counter-clockwise toward the “min”. Similarly, at its lowest speed, the dial will cease to move any further (Fig. 2).

Figure 1

Top Piece

PVC Tube

Pump

Base

On/Off	Adaptor
Switch

Figure 2

Figure 3

Figure 4

PVC Tube

NOTE: It is recommended the pump be set at its highest speed during assembly and later adjusted to a lower setting if desired. Be sure to unplug the pump before adjusting the speed setting.

4.Place the fountain base on a sturdy, level surface in the desired location, ensuring its electrical cord will sufficiently reach an electrical outlet. Once assembled, the fountain may be difficult to move due to splashing. Once in the desired location, lead the power cord attached to the base through the notch at the bottom of the base to ensure the base sits level without wobbling. Attach the A/C adapter jack to the base power cord. Do NOT plug in at this time (Fig. 3).

5.Add clean water to the base until the water level is 1/2” to 3/4” below the rim.

6.Connect the PVC tube to the pump, adjust the pump speed and place the fountain top on the base (Fig. 4).

7.Place the fountain top on to the base.

8.Plug the A/C adapter into a 120V household outlet. The fountain is controlled by the switch located on the power cord. If pump doesn’t operate, rotate in- line switch once to turn “on” and once more to turn “off”.

NOTE: If you can hear the pump gurgling or making sounds, you have not added enough water to cover (submerge) the pump.

9.It will be necessary to add water occasionally due to evaporation.

NOTE: Always add water when fountain is “OFF” to avoid overflow.

Envira Scape specifications

The HoMedics Envira Scape is an innovative solution designed to create a serene and tranquil environment in any setting. This versatile device combines soothing sounds with stunning visual elements to promote relaxation and enhance well-being. Whether you need to mask unwanted noise, improve your relaxation techniques, or set the mood for meditation, the Envira Scape has you covered.

One of the standout features of the HoMedics Envira Scape is its array of high-quality sound options. Users can choose from a selection of nature-inspired sounds, such as gentle rain, ocean waves, or a bubbling brook. These sounds are meticulously crafted to create an immersive experience, helping to drown out distractions and immerse users in a peaceful atmosphere.

In addition to its sound options, the Envira Scape also incorporates advanced visual technologies. It features a dynamic LED light display that mimics natural settings, creating a captivating ambiance. Users can customize the light patterns and colors, making it an adaptable addition to any space. This combination of sound and light aims to engage multiple senses, enhancing relaxation and promoting a calming environment.

The Envira Scape is designed with user convenience in mind. It features an intuitive control panel that allows users to easily adjust sound levels, select programs, and customize lights. Additionally, the built-in timer function enables users to set the device for a specific duration, ensuring it turns off automatically while they drift into deep relaxation or sleep.

Furthermore, the portable design of the HoMedics Envira Scape makes it an ideal companion for various settings, from home and office to travel. Lightweight and compact, it can be easily transported, allowing users to create a soothing atmosphere wherever they are.

Overall, the HoMedics Envira Scape is a cutting-edge device that combines sound, light, and user-friendly features to help improve mental wellness and create a peaceful oasis. With its various settings and options, it caters to the relaxation needs of individuals, making it a worthy addition to any lifestyle focused on mindfulness and tranquility.