EnviraScape Fe a t u r e s

Assembly and Instructions for Use

1. Unpack the product. Wipe off dust with a damp cloth.

•Unique water design - Illuminated streams of rain create a unique visual display.

•Special effects lighting illuminates fountain in red, blue and yellow for a more dramatic effect.

•The soothing sound of rainfall creates a stress free ambiance.

•Improves concentration by masking distractions so you can stay focused.

•Innovative, artistic design enhances the environment at home or at work.

•Durable water pump can be operated from any indoor electrical outlet.

•Convenient tabletop size - fountain measures 7.25”L x 4.25”W x 9.75”H.

Fill with water

Fountain Top

1/2” from top

2 . Familiarize yourself with the pump. The pump speed is controlled by the switch located at the front of the pump. The speed is indicated by a plus

(+)and minus (-) sign. To increase the speed, move the switch slowly in the direction of the plus sign. You will hear a click as the switch moves to each speed level. At its highest speed level, the switch will cease to move any further. To decrease the pump speed, move the switch toward the minus sign. Similarly, at its lowest speed, the switch will cease to move any further. NOTE: It is recommended the pump be set at its highest speed during assembly and later adjusted to a lower

setting if desired. Be sure to unplug the pump before adjusting the speed setting.

3.Lead the cord through the cord slot on the bottom of the base.

This will ensure that the unit is balanced when placed on a flat surface. Attach the A/C adaptor jack to the base power cord. DO N O T plug into outlet at this time (Fig. 1).

4.Insert the tube on the bottom side of the fountain into the pump (Fig. 2).

5.Set the fountain top onto the base so it sits level. NOTE: Ensure the foun- tain is on a horizontal surface on top of the black waterproof mat provided.

6.Fill base with tap water to 1/2” from top. We recommend using distilled water to prevent mineral build up (Fig. 3).

7.Plug the cord into 120V household outlet. The fountain is controlled

by the switch located on the power cord. If pump doesn’t operate, rotate in-line switch once to turn “on” and once more to turn “off” .

8 . To adjust rainfall speed, turn the water flow dial (Fig 1) clockwise to increase the rainfall and counter-clockwise to decrease.

Monthly maintenance will add to your pump’s life. NOTE: Ensure that the electrical cord loops below the electrical outlet to form a ‘Drip Loop’. This will prevent water from running down the cord into the electrical outlet.

Water Flow Dial

Tube

Lights

Waterproof

Mat

Pump

Cord Slot

Insert tube into pump

Adaptor

Cleaning Pin

On/Off Switch