Preparation, Tools Required, Steps | Jackson 07610-003-13-91 A

www.jacksonmsc.com

Many dishmachines comes with integral booster tanks to ensure proper temperature of the final rinse. Jackson has predom- inantly used two manufacturers of thermostats, EGO and Stemco. These instructions are for use with kit 06401-003-13-94, which is to replace an EGO rinse regulating thermostat with a Stemco brand.

Jackson offers all of the repair parts necessary for per- forming this task.

The instructions provided here are for maintenance per- sonnel only. Unauthorized persons should not attempt any of the steps contained in these instructions.

Warning: many of the instructions and steps within this document require the use of tools. Only authorized per- sonnel should ever perform any maintenance procedure on the dishmachine!

PREPARATION

1.Power must be secured to the unit at the service break- er. Tag or lock out the service breaker to prevent accidental or unauthorized energizing of the machine.

2.Ensure that incoming water to the machine is secured either by use of a shut-off valve or disconnecting the incoming water line.

3.The unit must be drained completely with the drain stopper removed (if applicable).

4.Remove any and all access covers.

TOOLS REQUIRED

The following tools may be needed to perform this main- tenance evolution:

1.3/8” Nutdriver

2.7/16” Combination Wrench

3.Needlenose Pliers

4.Phillipshead Screwdriver

5.Flathead Screwdriver

6.Ratchet with 1/2” Socket

TIME REQUIRED

It is estimated that it will take (1) person sixty minutes to perform this task, not including all of the items indicated in the sec- tion entitled “PREPARATION”.

IMPORTANT NOTES

1.Read these instructions thoroughly before attempting this maintenance task. Become familiar with the parts and what actions need to be taken. This will save time in the long run!

2.These instructions are shown using a Tempstar model dishmachine. However the steps provided should work for models such as the JPX-300H as well.

STEPS

1.Some models, such as the Tempstrar pictured below, will require that the thermostat bracket removed from the heater. Using a ratchet, extension and 1/2” socket, remove the nuts and lock wash- er holding the bracket on.

Removing the thermostat bracket/heater nuts.

Removing the thermostat bracket.

2.With the thermostat and thermostat bracket safely out of the way, use a 7/16” combination wrench to loosen and then remove the imperial brass fitting holding the probe in.

3.Remove the wires from the old thermostat. It may be necessary to use the needlenose pliers to accomplish this.

4.Remove the thermostat bracket mounting nuts with the 7/16” nutdriver.

	2	Rinse RegulatingThermostat Replacement Instructions
	2	Revision A (11/16/2005)
		Revision A (11/16/2005)

Rinse Regulating Thermostat Replacement, 07610-003-13-91 A specifications

The Jackson Rinse Regulating Thermostat Replacement, model 07610-003-13-91 A, is an essential component designed to ensure optimal performance in commercial dishwashing systems. As a critical part of the rinse cycle, this thermostat maintains the appropriate water temperature, which is vital for sanitization and effective cleaning.

One of the main features of the 07610-003-13-91 A is its accurate temperature regulation. The thermostat is engineered to provide reliable performance, helping to maintain the rinse water temperature within precise parameters. This is essential for meeting health and safety standards, ensuring that dishes are not only clean but also sanitized effectively.

In terms of technology, this replacement thermostat utilizes advanced thermal sensing capabilities. It offers quick response times, enabling rapid adjustments to maintain the desired temperature. This feature minimizes the risk of temperature fluctuations that could lead to ineffective rinsing or damage to delicate dishware.

Durability is another hallmark of the Jackson Rinse Regulating Thermostat. Constructed with high-quality materials, it is designed to withstand the rigors of commercial kitchen environments. This includes exposure to water, detergents, and varying temperatures, making it a reliable choice for long-term use in high-demand settings.

Installation of the 07610-003-13-91 A is straightforward, with compatibility designed to fit a variety of Jackson dishwashing systems. This ease of installation minimizes downtime, allowing businesses to quickly restore their equipment to optimal functionality.

In addition, the thermostat boasts energy efficiency, which can help reduce operational costs. By maintaining optimal rinse temperatures without excessive energy consumption, it contributes to a more sustainable kitchen operation.

Furthermore, the Jackson Rinse Regulating Thermostat Replacement is backed by manufacturer support, providing users with resources for troubleshooting and maintenance. This ensures that any issues can be quickly addressed, prolonging the lifespan of the thermostat and the overall dishwashing system.

Overall, the Jackson Rinse Regulating Thermostat Replacement, model 07610-003-13-91 A, is a vital component for ensuring efficient and effective dishwashing processes in commercial settings. With its combination of accurate temperature regulation, advanced technology, durable construction, easy installation, and energy efficiency, it is an invaluable investment for any professional kitchen.