About Heat Pump Systems

1)Terminal 5 (O) is energized for cooling Terminal 6 (B) is energized for heating

In most applications, the reversing valve is energized for cooling and should be connected to the "O" terminal. If the heat pump requires the reversing valve to be energized for heating, connect the reversing valve to the "B" terminal.

2)To temporarily disable Energy Efficient Control and heat as quickly as possible, press [HOLD] and select “On”. The RC-1000 will use the Auxiliary Heat as needed to reach the heat setting.

3)Terminal 9 (L) is used to indicate a fault with the heat pump compressor. When there is a compressor fault, the display will flash red and the “Heat Pump Fault” error message is shown.

4)The Emergency Heat Relay (E Terminal) and outdoor thermostats (usually accessories to a heat pump), are not used. The RC-1000 automatically controls auxiliary heat efficiently. If the heat pump is equipped with an outdoor thermostat, it should be removed from the auxiliary heat circuit.

About Dual Fuel Heat Pump Systems

A dual fuel heat pump typically has a gas furnace combined with a heat pump. The gas furnace is used as auxiliary heat unless the outdoor temperature is very low, in which case it is used as the primary heat source.

1)When used with dual fuel heat pumps, the RC-1000 requires a method for obtaining the outdoor temperature. A temperature sensor can be physically connected to the “Remote Temp. Sensor” terminals on the thermostat or the RC-1000 can obtain the outdoor temperature from a remote system.

If the RC-1000 can not obtain the outdoor temperature, the heat pump compressor will not operate and the thermostat will only call for the auxiliary heat until the problem is resolved. When this occurs, the display will flash red and the “Problem With Outdoor Temperature Sensor. Some Heat Stages May Be Disabled” error message is displayed. After the error has been acknowledged, “Outdoor Sensor Fault” will be displayed in the Message Bar until the problem is resolved.

2)Balance Setpoint Limits:

If the outdoor temperature is above the “Upper Balance Setpoint” (45°F by default), the heat pump is used exclusively.

If the outdoor temperature falls below the “Upper Balance Setpoint” but is above the “Lower Balance Setpoint” (35°F by default) and if the heat pump is unable to heat at a rate of 5 degrees per hour or better, the heat pump will turn off and auxiliary heat will be used until the call for heat has been satisfied.

If the outdoor temperature falls below the “Lower Balance Setpoint”, the heat pump will turn off and the auxiliary heat will be used until the call for heat has been satisfied.

The Balance Setpoint Limits can be adjusted according to the manufacturer’s specifications under “Balance Setpoint” – See Installation Settings.

3)When the RC-1000 makes a call for auxiliary heat, the heat pump compressor is turned off and the auxiliary heat is used exclusively.

RC-1000 specifications

The Home Automation RC-1000 is an innovative solution designed to bring convenience, efficiency, and enhanced control to modern living spaces. As the centerpiece of smart home integration, the RC-1000 offers a suite of features that cater to the needs of homeowners seeking to optimize their daily routines and improve their overall quality of life.

One of the standout features of the RC-1000 is its user-friendly interface, which allows seamless interaction with various connected devices throughout the home. The device supports multiple communication protocols, including Wi-Fi, Zigbee, and Z-Wave, making it compatible with an extensive range of smart devices, from lighting and thermostats to security systems and appliances.

The RC-1000 excels in automation capabilities. Users can create personalized schedules and routines that tailor automated tasks to their lifestyle. For instance, homeowners can program the system to turn off the lights and lower the thermostat at a designated time, ensuring energy efficiency and cost savings. Moreover, the device enables geofencing technology, allowing it to detect when users leave or arrive home and triggering appropriate actions, such as locking doors or activating certain devices.

Another key characteristic of the RC-1000 is its voice control functionality, which integrates seamlessly with popular virtual assistants like Amazon Alexa and Google Assistant. This capability offers a hands-free approach for managing smart home devices, allowing users to simply speak commands to control everything from entertainment systems to climate control.

The RC-1000 also prioritizes security, featuring real-time monitoring and alerts. Homeowners can receive notifications about unusual activity detected by security cameras or sensors, providing peace of mind whether they are at home or away. Integration with smart doorbells allows users to see and communicate with visitors remotely.

In terms of design, the RC-1000 boasts a sleek, modern aesthetic that fits aesthetically into any home decor. Its compact form factor makes it easy to place in virtually any location without compromising style or functionality.

In summary, the Home Automation RC-1000 represents a significant advancement in the smart home landscape. With its robust feature set, advanced compatibility, automation capabilities, and emphasis on security, the RC-1000 empowers homeowners to enjoy a more connected, efficient, and safe living environment. As technology continues to evolve, devices like the RC-1000 will play a crucial role in shaping the future of our homes.