Ramsey Electronics SHA1 specs

11. Install U2, one of the LM386 audio power amplifier ICs. Check the orientation of this chip to make sure the dot or notch representing pin one is in the same direction as shown in the parts diagram. Make sure all eight pins are through the board before soldering. Note that it is very easy to have a pin folded under the IC instead of being though the holes. This problem is easy to remedy before you solder the IC.

12. Install R8, a 2 ohm resistor (red-black-gold).

13. Install C9, one of the .1uF ceramic capacitors (Marked 104, or .1).

14. Install C13, a 100pF ceramic capacitor (Marked 101).

15 Using a scrap piece of component lead, install JMP5. Note that this part does not need to be bent as shown in the diagram, just make sure that it is installed in the correct holes.

16. Install C4, a .01uF ceramic capacitor (Marked .01, 10n, or 103).

17. Install R4, a 2 ohm resistor (red-black-gold).

18. Install U1, the remaining LM386 audio amplifier IC. Again make sure that all eight pins are through the board before soldering and that the part is installed in the correct direction.

19. Install C11, a 100pF ceramic capacitor (Marked 101).

20. Install C5, a .1uF ceramic capacitor (Marked 104 or .1).

21. Install JMP4 using a scrap piece of component lead.

22. Install C2, a 470uF to 1000F electrolytic capacitor. Make sure and mount this part in the correct direction! If you look at the component you will see a stripe down one side,

SHA1• 13

SHA1 specifications

Ramsey Electronics SHA1 is a sophisticated audio amplifier designed for high-quality sound performance in various applications. Known for its compact design and robust features, the SHA1 is suitable for personal audio setups, professional applications, and even educational purposes.

One of the standout features of the SHA1 is its ability to deliver powerful sound output while maintaining clarity and fidelity. The amplifier offers a significant wattage that is enough to drive a wide range of speakers effectively. This power ensures that users can enjoy rich sound without distortion, making it a favorite among audiophiles and musicians alike.

The SHA1 incorporates advanced technologies that enhance its performance. For instance, it uses high-quality capacitors and resistors to minimize noise and signal loss. This ensures that the sound produced is pure and true to the original audio source. The use of Class AB amplification technology allows the SHA1 to balance efficiency and sound quality, providing users with an experience that satisfies their audio needs.

Another notable characteristic of the Ramsey Electronics SHA1 is its versatility in input options. It typically supports multiple audio input types, including RCA, 3.5mm auxiliary, and even professional audio inputs, making it compatible with various audio devices, from smartphones to musical instruments. This flexibility ensures that users can easily connect their devices and enjoy seamless audio playback.

User-friendly controls are a significant aspect of the SHA1 design. The amplifier often features straightforward volume controls, tone adjustments, and easily accessible input selections. This simplicity allows users of all skill levels to operate the amplifier without any confusion or technical know-how.

The sleek design of the SHA1 makes it an attractive addition to any audio setup. Its compact size ensures that it can fit into tight spaces, while its stylish aesthetics can complement any decor.

Overall, Ramsey Electronics SHA1 stands out for its combination of power, clarity, versatility, and user-friendly design. Whether for home audio systems, professional use, or educational setups, the SHA1 is a reliable choice for anyone seeking an exceptional listening experience. It embodies Ramsey Electronics’ commitment to quality and performance, making it a well-regarded option in the audio amplifier market.