Lightolier Lytecel Linear Surface/Pendant And Electrical Feed Through Wiring/Continuous Rows

Lytecel 6-page Inst. Sht.qxd 2/25/05 4:40 PM Page 2

Stem Set for End of Row or Continuous Row Mounting with Reflector or without Reflector.

3	Slip threaded end of stem through Canopy. Attach
	Stem(s) to Slide Grip Hanger using Nuts as shown.
	Assemble Slide Grip Hanger to Fixture Slide Rails.
	Assemble Ball Aligner to Stem and Slide onto
	Mounting Strap.
	For sloped ceilings, be sure opening of Mounting
	Strap is positioned facing upward with the slope of
	the ceiling or Stem will disengage.

Cable Set for Continuous Row or End of Row with Reflector or without Reflector

4 Secure cable set with threaded end of Mounting Strap through Canopy into Top Cable Bushing. Assemble Bottom Cable Bushing to Slide Grip Hanger with Nut as shown. Assemble Strain Relief in K.O. in Slide Grip Hanger and seat properly. Use Screws to assemble End Cap to Fixture. Bend tabs out to secure Slide Grip Hanger to Fixture when not installed at end of Fixture.

5 Slide Grip Hanger Mounting Locations

48" (1219mm) or 96" (2439mm)

42" (1067mm) or 90" (2286mm)

Bend Tab out to secure Slide Grip Hanger to

Fixture when not installed at end of Fixture. Make

wiring connections. Using Screws, secure End Cap

to Fixture.

Catalog No. WC60 – Canopy, Cable

Catalog No. WCC60 – Canopy, Cable, Straight Cord Catalog No. WCCC60 – Canopy, Cable, Coiled Cord

3" (76mm) Min.	3" (76mm) Min.
12" (305mm)	12" (305mm)
Max. 4' Unit	Max. 4' Unit
24" (610mm)	24" (610mm)
Max 8' Unit	Max 8' Unit

	Ball Aligner	Ball Aligner
	Mounting	Mounting
	Strap	Strap
Canopy	Canopy
	Stem	Slide Grip
		Hanger
Stem	Nut	Stem
		Nut
	Slide Grip
Nut	Tab Detail Hanger
		Nut
Slide Grip	Screw	Slide Grip
Hanger
		Hanger
	Fixture
	Side Rail
		Fixture

(4') 48"

Nut

Nut

(8') 99-3/4"

End Cap

Fixture

Side Rail

Strain

Relief

Strain

Relief

Detail

Strain Relief

Fixture

Side Rail

Mounting			Mounting
			Strap
Strap
		Strain	Canopy
Canopy	Strain	Relief
	Relief
	Detail		Fixture

Top Cable		Top Cable	Side
	Fixture Side Rail	Bushing	Rail
Bushing

Bottom
Cable		Bottom		Strain Relief
Bushing	Slide Grip
		Cable		Bottom Cable Bushing
	Hanger
		Bushing		Slide Grip
			Screw
				Hanger
		Tab Detail	Strain	Fixture
			Relief
		(4') 48"
Nut		Slide Grip
		Hanger
		(8') 99-3/4"		Nut
				End Cap

Through Wiring/Continuous Rows

6	Join Fixtures with Screws (2) Provided. Hook
	wires into Slot in End Plate. Make Plug-in wiring

connections in Wireway. Replace Wireway Cover.

Fixture

Screw

Provided

End Plate

Alignment

Tab

Slide Grip Hanger Along Length of Fixture Slide Grip Hanger for Beginning or End of Row

Slide Grip Hanger Along Length of Fixture Slide Grip Hanger for Beginning or End of Row

Wago Slot Plug-ins

Supplied #14 Gauge Maximum Wire Solid or Stranded

Screw Provided