Testing the RRW1A, Method #1 | Ramsey Electronics specs

is straight and flush to the board. Then solder the rest before moving on.

31. Install C10, the large 1000 uF electrolytic capacitor. Double check the orientation before soldering as this is especially critical with this component. Follow the same guidelines you used to install C9!

32. Install ANT1, the 6” piece of buss wire. Solder the wire in place where the circuit board has been marked “ANT1” for easy identification. Use a ruler and trim off any extra wire if longer then 6” (5 3/4” to 6” works great).

FINISHED!! 32 steps may not seem like a lot but we are done with the transmitter! You should go back through the steps before moving on and check for proper orientation of devices before plugging in the power however. This will prevent damaging anything by accident. Check capacitors for orientation, the IC, and also the rectifier diode as preventative measures.

TESTING THE RRW1A

Method #1

To begin testing the RRW1A you will need the following items:

AC Power supply between 6 and 12VAC or..

DC power supply between 8 and 14VDC.

A known functional IR remote control

Apply power to J1 and turn on the power switch (S1). The Data LED (D1) should turn on and stay on, acting as a dual purpose power LED. The only time D1 will turn off (or become very dim) is when an active 38 kHz data stream is being received by the IR detector module (U1).

A quick functional test is to verify that the Data LED flashes off when you point an IR remote at the IR sensor (U1). The flashing indicates that the data from the remote control is being seen.

If you wish to go one step further and you have a radio which can tune to

433.42MHz (AM mode), you can verify that the oscillator is working. Tune the radio for 433.42 MHz and turn on the RRW1A power switch (S1). Press a but- ton on the remote control and you should be able to hear the data stream be- ing transmitted from the RRW1A. The selectivity of your monitoring radio may be much tighter than that of the receiver (RRW1B) so you may need to tune up or down a bit on the dial to find the signal. Adjusting the frequency of the transmitter for exactly 433.42 MHz will not be needed due to the front end characteristics of the mating RRW1B series receivers. This makes life easy!

RRW1A • 13

RRW1A specifications

The Ramsey Electronics RRW1A is a versatile radio frequency (RF) wireless microphone system that stands out due to its robust features and reliable performance. Designed primarily for educational institutions, conferences, and public speaking events, the RRW1A offers a user-friendly experience paired with superior audio quality.

One of the main features of the RRW1A is its RF transmission technology, which allows for seamless communication over distances of up to 300 feet. This range is particularly beneficial in larger venues, enabling users to move freely without sacrificing audio clarity. The device operates within a specified frequency band to minimize interference, ensuring a clean audio signal. This digital frequency modulation is complemented by an assortment of selectable channels, allowing users to switch frequencies when faced with potential interference from other devices.

Another significant characteristic of the RRW1A is its dual-channel operation. This feature enables users to connect two different microphones or audio sources simultaneously, making it an ideal choice for panel discussions or multi-person presentations. The system supports both dynamic and condenser microphones, providing flexibility based on user preferences.

The RRW1A also features a built-in rechargeable battery system, offering convenience for users who need a reliable and portable solution. The runtime of the battery extends through long sessions without the anxiety of losing power. Additionally, the device includes LED indicators that show battery life and signal strength, allowing users to monitor the status easily.

Ease of use is a hallmark of the RRW1A, equipped with a simple interface and compact design. The setup process is straightforward, requiring minimal technical knowledge. Users can quickly connect and start broadcasting, making it an accessible tool for educators and event organizers alike.

Moreover, the RRW1A is built with durability in mind. Its rugged construction withstands the rigors of frequent use in various environments. This reliability makes it a preferred choice for both rental services and permanent installations.

In summary, the Ramsey Electronics RRW1A is a powerful and flexible RF wireless microphone solution, featuring RF transmission technology, dual-channel capability, built-in rechargeable batteries, and user-friendly operation, making it an excellent choice for anyone seeking a high-quality audio solution for various applications.