Lightolier FX manual Features, Finish, Electrical, Mechanical, Labels

					Tangent™ Track Lighting System  FX
Page	of 3
				47 5/8 in [1210 mm]			FX04
3/16 in				95 5/8 in [2489 mm]		3/16 in	FX08
[4.8 mm]				143 5/8 in [3648 mm]		[4.8 mm]
							FX12
							FX25
							FX61
5						5	FX48
							FX52
						4
							FX53
			3/8 in [9 mm]				FX53
							FX54
			1				FX55
							FX87
					3/4 in [19 mm]		FX89
							FX100
			3		3
			2
Ordering Information
Catalog No.		Finish		Description		Track Mountings
FX04		Clear Anodized		4' Track		Tangent Surface Track may be ceiling,
FX08		Clear Anodized		8' Track		vertical-wall or horizontal-wall mounted.
FX12		Clear Anodized		12' Track		Mounting anchors or clips must be placed
FX25		Clear Anodized		Mounting Anchors (5pk)		no more than 3’ apart for continuous
FX48		Silver		Surface Power Feed		ceiling-mounted runs, and no more than
FX61, FX61WH		Silver, White		J-Box Feed Canopy		2' apart for wall-mounted runs. A mounting
FX52		Silver		Variable Angle Connector, Mechanical only		anchor or clip should also be placed 6" from
FX53		Silver		Variable Angle Connector, Electro/Mechanical		each end of the track run. Surface mount
FX54		Silver		Mini-Coupler, Electro/Mechanical		anchors and grid clips are sold separately.
FX55		Silver		Mini-Coupler, Mechanical Only
FX87		Silver		Grid Ceiling Mount Clips, Regressed-Edge (5pk)
FX89		Silver		Grid Ceiling mount Clips, Square- Edge (5pk)
FX96, FX96WH		Silver, White		Grid Ceiling Feed Canopy
FX100		N/A		Bending Tool

Features

Tangent Surface Track is a one-circuit electrical distribution system designed to support and supply all Tangent lighting units in a flexible manner. The track can be installed individually in straight runs or in a variety of patterns using the appropriate connectors. The track can also be bent by hand in the field or with an FX100 bending tool into curves with a minimum radius of 3'. All track lengths can be field cut.

1.Tangent™ Track: Anodized aluminum with a clear protective coating

2.Insulating Liner: Clear polycarbonate; houses conductors

3.Conductor (2): Tin plated copper

4.Polarity Dimple: Identifies the 120V line conductor

5.End Cap: Silver painted polycarbonate

Finish

Tangent track and mounting anchors are anodized aluminum with a clear protective coating. Connectors and end caps are painted in a coordinating silver finish. All painted finishes are baked enamel.

Electrical

Capacity is 20 amps at 120 volts 60Hz per branch circuit. The track units are polarized and continuously grounded throughout. Electrical conductors are contained in the polycarbonate extrusion. Track is intended for wiring to branch circuit building wire with ground. All wiring must be in accordance with National and Local Codes.

Mechanical

Track units plug together using tangent connectors and lock securely to prevent accidental separation. Tangent™ lighting units can be attached at any point along the track, up to 3" from end of Track.

Labels

cULus; Patent Pending

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2007 Genlyte Group LLC • D0907