Lightolier CXS Series 2x4 dimensions Recessed Fluorescent, Ordering Information, Specifications

CXS SERIES 2X4	CLEANGUARD CLASS 10,000 CLEAN ROOM
	RECESSED FLUORESCENT

PHOTOMETRY MODEL NO. CXS2GFSVI332120O3

G02021	DATE: 01-30-02
CXS2GFSVI332120O3
3 F32/T8 TL841, EACH RATED	2850 LUMENS

STANDARD CXS FIXTURE WITH INVERTED VI LENS IN FS F

		LER = FL - 73.2			IW - 108.7 BF - 0.86
		Comparative yearly lighting energy cost per 1000 lumens = $3.28
coefficients of utilization — zonal cavity method						(effective floor cavity reflectance 0.20)
	RF		20			20			20
	RC		80			50			30
	RW	70	50	30	50	30	10	50	30	10
ratio	1	74	71	68	67	64	62	64	62	61
	3	62	55	49	51	47	44	50	46	43
	2	68	62	57	58	55	52	56	53	51
cavity	4	56	48	43	46	41	37	44	40	37
	5	52	43	37	41	36	32	40	35	32
room	6	48	39	33	37	32	28	36	31	28
	8	41	32	27	31	26	22	30	26	22
	7	45	35	30	34	29	25	33	28	25
	9	39	30	24	29	24	20	28	23	20
	10	36	27	22	26	22	18	26	21	18

ORDERING INFORMATION

Explanation of Catalog Number. Example: CXS2GFSVI332120O3GLR

CX

CLEANGUARD

WET

LOCATION

Class 10,000

or

100,000

Clean Room

S

STATIC

2								VI	4
FIXTURE				LENS	FRAME:				LAMP
WIDTH				FS= Flat steel frame					QUANTITY:
				RA=Regressed					2=2 Lamp
				aluminum frame					3=3 Lamp
				FA=Flat aluminum					4=4 Lamp
				frame
		CEILING	TYPE:			LENS/SHIELDING TYPE:					LAMP/
	G= Grid (lay-in T bar)						VI (virgin acrylic) .125			FIXTURE LENGTH:
	F=Flanged (overlap) Z spline						standard. For options				32=T8
	and plaster frame							consult factory.			(Nominal 48")
								Smooth side of
							lens towards room.

VOLTAGE:		OPTIONS:
120 or 277	Add appropriate suffix
	to catalog no., ie: (GLR)

BALLAST TYPE:

<20THD <10THD

1 & 2 Lamp Elec. T8	SO*	HI*
2-2 Lamp Elec. T8	SO*	HI*
1-3 Lamp Elec. T8	O3*	H3*
1-4 Lamp Elec. T8	O4*	H4*
LOL T8 Dimming	PS
*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS/ACCESSORIES

PLASTER FRAME: Catalog Number PF24.

CONTINUOUS ROW INSTALLATION: For F type fixtures, half width flanges are required between fixtures. Order Catalog Number:

S2FCTRIM (each joint).

FUSING: Internal fast-blow fusing.

SUFFIX: GLR.

Internal slow-blow fusing.

SUFFIX: GMF.

ELECTRICAL/WIRING OPTIONS: Consult factory.

SPECIFICATIONS:

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing with side rails hemmed over and housing ends turned-in for safe handling.

FINISH: Chassis exterior–black baked polyester enamel. Cavity–white baked polyester enamel minimum 86% reflectance. Phosphate undercoating. LENSES: VI (standard) extruded virgin acrylic, 3/16" square based female cones, running 45° to the panel edge, .125" nominal thickness (similar to pattern 12).

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°. LABELS: I.B.E.W./UL and ULc Listed.

We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.

	TECHNICAL INFORMATION • (978) 657-7600
	631 AIRPORT ROAD, FALL RIVER, MA 02720 • (508) 679-8131
	C.F.I. DIVISION OF CANLYTE, INC.
	525 EDUCATION ROAD, CORNWALL, ONTARIO
A Genlyte Thomas Company
	CANADA K6H 6C7 • (613) 938-6221	PRINTED IN USA 3/02