Is CA3FMR | Lightolier instruction

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE

This luminaire is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS: CA3FMR

A1104

Page 1 of 2

INSTALLATION PROCEDURE FOR CALCULITE→ EVOLUTION:

CA3FMR SERIES FLANGELESS TRIM RING FOR FLANGELESS TRIMS

NOTE: Photos shown here assume the Frame-In Kit and ceiling are already installed.

Fig. 1

CEILING VERTICAL

WALLS

For flangeless installations, cardboard PAINT OVERSPRAY SHIELD, which is installed in 3” Evolution Frame-In-Kits, must be removed prior to CA3FMR installation.

NOTE: The bottom surface of the Frame-In Kit should be flush with the top surface of the ceiling material.

1.Do not remove cardboard FLANGELESS TRIM RING PLASTER SHIELD from flangeless trim ring.

2.Prior to installation, ensure that ceiling opening is

3-5/8”

OPENING

FLANGELESS TRIM

PLASTER SHIELD

3-5/8” in diameter.

NOTE: For maximum adhesion, a bead of construction adhesive can be applied to the back (ceiling) side of the FLANGELESS TRIM RING perforated flange.

3.Insert FLANGELESS TRIM RING into ceiling opening and rotate clockwise, ensuring the perforated flange is flush to the ceiling (Fig. 1). Blades on outside edge of ring should bite into ceiling and secure ring in place.

NOTE: For applications where ceiling thickness is less than ¾”, FLANGELESS TRIM RING should fit between ceiling & Frame-In Kit (Fig 2). For applications where ceiling thickness exceeds ¾”, FLANGELESS TRIM RING will not contact installed Frame-In Kit. It is therefore critical that FLANGELESS TRIM RING be vertically aligned with the Frame-In Kit aperture. Vertical walls of cardboard FLANGELESS TRIM RING PLASTER SHIELD should fit inside Frame-In Kit aperture and be used to ensure vertical alignment.

RING PERFORATED

FLANGEINSTALL RING IN THIS DIRECTION

Fig. 2	FRAME-IN KIT	CEILING
		OPENING
		OPENING


CEILING

PLASTER/JOINT	CA3FMR FLANGELESS
COMPOUND	TRIM RING

U.S. AND FOREIGN PATENTS PENDING

A COMPANY

631 Airport Road, Fall River, MA 02720

CA3FMR specifications

The Lightolier CA3FMR is an advanced lighting fixture designed for both residential and commercial applications, offering a blend of functionality and aesthetics. This innovative product stands out for its versatility and energy efficiency, making it an ideal choice for modern spaces.

One of the main features of the CA3FMR is its exceptional light output. The fixture utilizes LED technology, which not only provides bright illumination but also enhances energy efficiency, reducing power consumption significantly compared to traditional lighting solutions. This makes it a cost-effective option, particularly for areas that require extensive hours of operation.

The CA3FMR is designed with a sleek and contemporary aesthetic, ensuring it complements a variety of interior designs. It is available in multiple finishes, allowing users to select an option that aligns with their decor. The fixture's low-profile design provides a clean and unobtrusive look, making it perfect for ceilings, wall installations, or accent lighting.

Equipped with advanced dimming capabilities, the CA3FMR provides users with the flexibility to adjust brightness levels according to specific needs or moods. This feature is especially valuable in settings such as dining areas, where ambiance is essential, or in conference rooms, where different lighting levels may be required for presentations.

Another notable characteristic of the CA3FMR is its ease of installation. The fixture is designed for quick and straightforward mounting, which minimizes installation time and labor costs. The inclusion of user-friendly components further simplifies this process, making it accessible even for those with limited experience in electrical work.

In terms of durability, the CA3FMR is built to last. Its robust construction and high-quality materials ensure longevity, reducing the need for frequent replacements. Moreover, the LED technology not only decreases energy costs but also has a longer lifespan compared to conventional bulbs, further contributing to its sustainability.

The Lightolier CA3FMR is also compatible with smart home systems, allowing users to integrate it into their existing automation setups easily. This compatibility enables remote control options and scheduling features, providing an added layer of convenience and efficiency in lighting management.

In conclusion, the Lightolier CA3FMR is a state-of-the-art lighting fixture that combines efficiency, style, and advanced technology. With its bright LED output, customizable dimming features, easy installation, and smart home compatibility, it is an ideal choice for anyone looking to enhance their lighting experience in a modern and sustainable way.