Architectural Decorative ISCCLRD01, Installation

Architectural Decorative IS:CCLRD01

Page 2 of 3

Installation

The color rotary dial control shall be installed by a qualified electrician in accordance with NEC and relevant local codes for power supplies with Class 2 outputs.

Instruction Sheet for Assembly and Installation

Note: Keep in mind that any effects you disable prior to installation can only be re-enabled by physically removing the color rotary dial control from the wall box and turning on the appropriate switch.

Mounting the color rotary dial control:

Color Rotary Dial Control Back
		Mounting Holes
Enable/Disable
DIP Switches	Mode Selection
	Mode Selection
ON: Enabled OFF: Disabled
Ground	+24 VDC Data + Data -	Ground
Five-position		Modes:
Terminal Block		Modes:
Terminal Block		1.	Fixed color
		2.	Color wash
		3.	Rainbow (4)
		4.	Rainbow (8)
		5.	Rainbow (12)
		6. Random
		7.	Random fade
		8.	White

Fig. 2

Mode Selection

ON: Enabled OFF: Disabled


Ground	+24 VDC	Data +	Data -	Shield

Now that you have wired the color rotary dial control, and disabled/ enabled the desired effects, you are ready to mount it.

1.Using screws provided, align the mounting holes to a one gang wall box, or a single area of a multi gang wall box, and attach.

2.Attach face plate.

3.Attach knob by aligning the collar with the rotation shaft and press.

Operating color rotary dial control

Using the color rotary dial control is as simple as pressing and turning. Press the dial to cycle through the eight effect modes and OFF.

Turn the dial to vary the effects.

In Fixed Color mode, turning the dial changes the color. While in White mode, turning the dial changes the intensity. In all other modes, turning

WARNING: Ensure that power is off before installing the color rotary dial control.

Wiring the color rotary dial control (refer to Fig. 3 wiring diagram)

1.Using the 18 AWG power cable, connect 24 VDC and ground from power supply to the screw terminal located on the back of the color rotary dial control.

2.Using the CAT 5 data cable, connect data from the color rotary dial control power/data supply to the screw terminal located on the back of the color rotary dial control.

To Disable Effects:

When you receive your color rotary dial control, eight light effects are preprogrammed and enabled. If you wish to limit the number of effects in the cycle, or if you know of effects that you will not use, you can disable the them prior to physically installing the color rotary dial control into the wall box.

•To disable an effect, set its corresponding dip switch to OFF.

1. Fixed Color

2. Color Wash

3. Chasing Rainbow (4 lights wide)

4. Chasing Rainbow (8 lights wide)

5. Chasing Rainbow (12 lights wide)

6. Random Color

7. Random Fade

8. White

the dial adjusts the speed. Color rotary dial control remembers your set- tings and recalls them each time you return to the effect.

Turn the dial clockwise to increase, and counter-clockwise to decrease, the speed. The first three revolutions of the dial varies the speed between approximately 1/2 second to about 2 minutes. After which, each click of the dial doubles the speed clock-wise or decreases by half counter-clock- wise. When in this range, the lights snap to a new color with each click for visual confirmation of changes.

Note: In Chasing Rainbow, the speed of a single pass through the color spectrum ranges from 1/2 second to 5 hours. After the third rotation of the dial, the speed is reduced to the point that color changes are not immediately visible.

The color rotary dial control outputs data for light addresses 1 through 60. After the first 12 addresses, the data is repeated. For installations with more than 12 lights you can either sequentially address the lights past 12, up to 60, or repeat the addresses starting from 1. The effects will appear the same. Below is an example of light addressing with 24 lights.

Sequential Addressing

1 2 3 4 . . . 11 12 13 14 . . . 21 22 23 24

Repeat Addressing

1 2 3 4 . . . 11 12 1 2 . . . 9 10 11 12

Lightolier is a Philips group brand

CCLRD01 specifications

Lightolier has long been a pioneer in lighting solutions, and their CCLRD01 model exemplifies modern innovation in the field. The CCLRD01 is a robust, versatile LED downlight that seamlessly blends performance, efficiency, and stylish design. This product is tailored for both commercial and residential spaces, providing an exceptional lighting experience.

One of the standout features of the CCLRD01 is its energy efficiency. Utilizing high-quality LED technology, it consumes significantly less power compared to traditional incandescent or halogen lights. This not only reduces electricity bills but also minimizes the environmental impact, making it an eco-friendly choice for consumers who prioritize sustainability.

The CCLRD01 is designed with flexibility in mind. It boasts a variety of beam angles, allowing users to choose the perfect spread of light for their specific application. Whether illuminating a kitchen, highlighting artwork in a gallery, or setting a mood in a living area, this downlight can be customized to meet different lighting needs. Additionally, the adjustable color temperature ranges from warm to cool, providing an array of ambiance options suitable for any occasion.

Another impressive characteristic of the CCLRD01 is its exceptional lifespan. With an average life expectancy of over 50,000 hours, this downlight significantly reduces the frequency of replacements, making it a cost-effective investment. The durable construction ensures that the CCLRD01 can withstand the rigors of daily use without compromising on performance.

Installation is straightforward, thanks to its compact design and compatibility with most standard housing systems. The CCLRD01 features a simple, tool-free method for mounting, making it accessible for both professionals and DIY enthusiasts alike. Moreover, its sleek and minimalist aesthetic ensures that it integrates seamlessly with various interior designs, enhancing the overall decor rather than detracting from it.

Technologically, the CCLRD01 is compatible with many smart lighting systems. With dimming capabilities and integration with smart home devices, users can control their lighting remotely or set specific schedules to fit their lifestyle. The ability to link it with mobile applications allows for an unprecedented level of convenience and personalization.

In summary, the Lightolier CCLRD01 combines energy efficiency, flexibility, and advanced technology in a stylish package, making it a standout choice for consumers seeking innovative lighting solutions. Its blend of performance, durability, and aesthetic appeal positions it as a leader in the realm of modern lighting products.