IV.
Tuning
the
Speaker
Speaker Front View: | Speaker Side View: |
A
D B
C
A. Power/tuning indicator light
B. Power/tuning/volume control C. Speaker power input jack D. Left/mono/right switch
1.Press the Power/tuning/volume (B) up to turn the speaker ON. The power/tuning indicator light (A) will illuminate red until the speaker is tuned to the transmitter and then the light will illuminate green, indicating that the speaker is tuned properly. You should hear sound coming from the speaker now.
Note: If the speaker is not tuned or if the transmitter is not connected properly, the power/tuning indicator light will continue to illuminate red. If this occurs, please see the troubleshooting section of this manual.
2.Adjust the volume on the speaker as desired.
3.Mono/stereo operation set up:
a)Monaural operation: The monaural mode (MONO) is recommended when using a single speaker or if using more than one speaker in different locations.
For monaural operation, set the left/mono/right switch (D) to “MONO” on each speaker.
b)Stereo operation: You will need an additional AW811 speaker in order to utilize the stereo option.
For stereo operation, set the left/mono/right switch (D) to “L” on the speaker located to the left from the listener, and set the other speaker to the “R” position.
Note: Interference in the form of static and/or distortion can sometimes be heard. If this occurs, confirm the transmitter/speaker adjustments and indicators. If the problem persists, refer to the Troubleshooting section of this manual.
6