Samsung LS17MJAKSZ/EDC, GS17VSSSY/EDC, LS19MJAKNZ/XSJ manual Control Panel → Display →, Settings

The screen shows strange colors or just black and white.

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

press any key on the keyboard to activate the monitor and restore the image on the screen.

Check the signal cable connection. Make sure the video card is fully inserted in it's slot.

Reboot the computer.

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

Have you adjusted the resolution or frequency on the monitor?

Is the frequency properly adjusted when checking the Display Timing on the menu?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes).

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

There are only 16 colors shown on the screen.

The screen colors have changed after changing the video card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

Have the Windows colors	Windows ME/2000/XP:
been set properly?	Set the colors properly at the
	Control Panel → Display →
	Settings.
Has the video card been	Set the video card by referring to the
set properly?	video card manual.
Have you installed the	Install the monitor driver according
monitor driver?	to the Driver Installation Instructions.
See the video card	Install the monitor driver according
manual to see if the Plug	to the Driver Installation Instructions.

&Play (VESA DDC) function can be supported.

Check when MagicTune does not function properly.

MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.

*To check whether your PC is available for MagicTune feature, follow the

steps below (When Windows is XP);

Control Panel -> Performance and

Maintenance -> System ->

Hardware -> Device Manager ->