Samsung LH40MSPLBB/EN, LH46MSPLBM/XJ, LH40MSPLBM/XJ, LH40MSTLBM/ZA, LH46MSPLBM/EN, LH46MSTLBM/EN Dual

		Introduction
		- This fuction does not work for this LCD Display.
16.	SOURCE	Changes the video source.
17.	INFO	The current picture information is displayed in the top left corner
		of the screen.
18.	EXIT	Exits from the menu screen.
19.	Up-Down Left-Right but-	Moves from one menu item to another horizontally, vertically or
tons		adjusts selected menu values.
20.	S.MODE	When pressing this button, the current mode is displayed at the

bottom centre of the screen. The LCD Display has a built-in high fidelity stereo amplifier. Then press the button again to circle through available preconfigured modes. ( Standard → Music → Movie → Speech → Custom )

21.STILL

22.FM RADIO

23.P.SIZE

24. SRS

25. DUAL/MTS

Press the button once to freeze the screen. Press it again to un- freeze.

Turns the FM Radio on/off. In PC/DVI mode, sets the SOUND to FM Radio. In general Video mode, selects FM Radio, and turns off the screen. In areas where the signal is weak, noise may occur during FM radio broadcasts.

-This fuction does not work for this LCD Display. Press to change the screen size.

SRS

DUAL-

26. PIP

27. SOURCE

28.SWAP

STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV.

MTS-

You can select MTS (Multichannel Television Stereo) mode.

	Audio Type	MTS/S_Mode	Default
FM Stereo	Mono	Mono	Manual Change
	Stereo	Mono ↔ Stereo
	SAP	Mono ↔ SAP	Mono

-This fuction does not work for this LCD Display. Every time you press the button, a PIP screen appears. Changes the source of the PIP window signal.

Swaps the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window.