Samsung LS70BPPNBYSEDC manual Specifications Information Appendix, Self-Test Feature Check

Page 16

Safety Instructions

Introduction

Connections

Using the Software

Adjusting the LCD Display

Troubleshooting

Self-Test Feature Check

Check List

Q & A

Specifications

Information

Appendix

Select Language

Main Page

Model

The color and appearance of the product may vary depending on the model, and the product specifications are subject to change without prior notice for reasons of performance enhancement.

Troubleshooting

Self-Test Feature Check

Note

Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself.

Self-Test Feature Check

Your LCD Display provides a self test feature that allows you to check whether your LCD Display is functioning properly.

1)Turn off both your computer and the LCD Display.

2)Unplug the video cable from the back of the computer.

3)Turn on the LCD Display.

The figure shown below ("Check Signal Cable") appears on a black background when the LCD Display is working normally even though no video signal is detected: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen.

4)Turn off your LCD Display and reconnect the video cable; then turn on both your computer and the LCD Display

If your LCD Display screen remains blank after using the previous procedure, check your video controller and computer system; your LCD Display is functioning properly.

Not Optimum Mode

You can even view the screen at a resolution of 1920 x 1080 . However, you will receive the following message for a minute; You can choose to change the screen resolution or stay in the current mode during that time. And if the resolution is more than 85Hz, you will see the black screen because the LCD Display does not support over 85Hz.

Note

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the LCD Display.

Image 16 Contents
LCD Monitor Safety Instructions Introduction Package ContentsQuick Setup Guide ModelEnter MenuSource Power BNCDVI HdmiRemote OUT/IN DVI / PC / Hdmi in HdmiOn / OFF Remote ControlMagicnet TTX/MIX LockENTER/PRE-CH Still FM RadioDUAL/MTS Dual MTSSafety Instructions Introduction Connections Installing the Stand KITInstalling the Semi Stand Connecting the LCD DisplayUsing a Power cord with Earth Connecting a ComputerConnecting a VCR Connecting a DVD Player Connecting a Camcorder Connecting a DTV Set Top Box Connecting to an Audio SystemConnecting Hdmi Connecting to a Wired Remote ControlConnecting Using a DVI to Hdmi Cable Connecting a LAN Cable Connecting a USB deviceSpecifications Information Appendix Self-Test Feature CheckSelf-Test Feature Check Not Optimum ModeMaintenance and Cleaning Symptoms and Recommended ActionsProblems related to the Installation PC Mode ProblemsProblems related to the Screen SolutionsProblems related to Audio LCD Display screen flickersProblems Solutions ProblemsSolutionsQuestion Answer
Related manuals
Manual 20 pages 19.91 Kb Manual 157 pages 51.7 Kb Manual 20 pages 10.51 Kb Manual 20 pages 37.33 Kb Manual 173 pages 19.28 Kb Manual 20 pages 28.81 Kb Manual 20 pages 19.83 Kb Manual 21 pages 30.13 Kb Manual 20 pages 27.17 Kb Manual 20 pages 52.65 Kb Manual 19 pages 7.44 Kb Manual 167 pages 41.32 Kb Manual 2 pages 8.93 Kb