Samsung DE17PSQFV/EDC, LS19GSESS/XSJ, LS19GSESB/XSJ, DE17PSQAQ/XSJ, DE19PSQFV/XSJ manual Epa/Energy

Page 49

Less than 40W

Dimensions (WxDxH)/ Weight

423 x 44.2 x 351.5 mm(16.7 x 1.7 x 13.8 inch)

423 x 236.2 x 412.7 mm(16.7 x 9.3 x 16.2 inch) / 7.1 kg(After installation of Stand) 423 x 103 x 351.5 mm(16.7 x 4.1 x 13.8 inch) / 7.1 kg(After folding the Stand)

VESA Mounting Interface

75mm x 75mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature: 50°F ~ 104°F(10°C ~ 40°C)

 

Humidity: 10% ~ 80%, non-condensing

Storage

Temperature: -4°F ~113°F (-20°C ~ 45°C)

 

Humidity: 5% ~ 95%, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Note: Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State

Normal Operation

Power saving mode

Power off

EPA/ENERGY 2000

 

 

 

Power Indicator

Blue

Black

Black

Power Consumption

Less than 40W

Less than 2W

Less than 1W

(Off-mode)

(120Vac)

 

 

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically (Exception : 640 x 480/60Hz, 720 x 400/70Hz, 800 x 600/60Hz) However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.

Image 49
Contents SyncMaster 173P plus/193P plus Notational PowerInstallation Insert the power plug firmly so that it does not come looseDo not use a damaged or loose plug Use only a properly grounded plug and receptacleKeep any heating devices away from the power cable Do not drop the monitor when moving itDo not place the product on the floor Set down the monitor carefullyDo not place the monitor face down CleanDo not spray water or detergent directly on the monitor Do not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetKeep power adapter away from any other heat source Keep all power adapters apartRemove and discard vinyl bag from power adapter before use Falling product could cause physical damage even death Natural Color software UnpackingMagicRotation software CableFront DVI port RearSub 15-pin port Page Attaching a Base Pivot StandWindows ME Wall Mounting the MonitorClick Windows ME Driver Click Windows XP/2000 Driver Windows XP/2000Microsoft Windows XP Operating System Page Microsoft Windows NT Operating System How to install Click Start , Setting , Control PanelLinux Operating System How to install the Natural Color softwareNatural Color Natural Color Software Program Page Installation Page Page Installation Problems MagicRotation Installation Problems MagicTuneSystem Requirements HardwareService Packs UninstallOverview OSD Mode sOverview OSD Mode Color Tone Color Tab DefinitionGamma Saturation Adjusts the color saturationImage Tab Definition Position Image SetupSharpness Option Tab DefinitionColor Calibration How multiple users can use adjusted color valuesColor Calibration Color CalibrationTroubleshooting TroubleshootingTo ensure normal operation, please restart your system Symptom Check List SolutionsWhat is MagicRotation? Basic Function InterfaceInterface To execute AutoRotation, it should be done as belowPage Page Before You Call Technical Support Page When connecting D-Sub cable Signal Cable on the screen?When connecting DVI cable Control Panel → Display → Settings Answer Self-Test Feature CheckUseful Tips Input Signal, Terminated ResolutionPower Supply Signal Cable State Normal Operation Power saving mode Power off Dimensions WxDxH/ Weight Vesa Mounting Interface Environmental considerationsPixel Clock Sync Polarity Display Mode Frequency MHz KHz Preset Timing ModesHorizontal Horizontal FrequencySyncMaster 193P plus EPA/ENERGY Horizontal North America Contact Samsung WORLD-WIDELatin America EuropeMiddle East & Africa Asia PacificFor Better Display TermsClass B AuthorityWhat is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode Suggestions for specific applications
Related manuals
Manual 61 pages 62.05 Kb Manual 59 pages 47.19 Kb Manual 60 pages 29.5 Kb Manual 136 pages 16.22 Kb Manual 58 pages 34.13 Kb Manual 59 pages 60.23 Kb Manual 58 pages 35.98 Kb Manual 54 pages 39.24 Kb Manual 60 pages 60.99 Kb Manual 56 pages 44.12 Kb Manual 61 pages 42.25 Kb Manual 59 pages 45.05 Kb Manual 59 pages 6.59 Kb Manual 59 pages 34.63 Kb Manual 59 pages 18.39 Kb Manual 62 pages 23.94 Kb Manual 63 pages 27.4 Kb Manual 59 pages 15.73 Kb Manual 64 pages 5.54 Kb Manual 65 pages 11.37 Kb Manual 63 pages 39.33 Kb Manual 61 pages 55.03 Kb Manual 61 pages 31.08 Kb Manual 61 pages 48.4 Kb Manual 60 pages 16.91 Kb Manual 64 pages 25.93 Kb Manual 62 pages 19.79 Kb Manual 61 pages 46.4 Kb Manual 61 pages 20.15 Kb Manual 63 pages 25.72 Kb Manual 63 pages 58.6 Kb Manual 61 pages 4.48 Kb Manual 59 pages 63.88 Kb Manual 61 pages 17.34 Kb Manual 65 pages 36.92 Kb