MENU | DESCRIPTION |
|
|
Moves the position of the display area on the screen horizontally. | |
| This function is only available in <Analog> mode. |
|
|
Moves the position of the display area on the screen vertically. | |
| This function is only available in <Analog> mode. |
|
|
Image Size | PC signals |
| • <Auto> - The picture is displayed at the aspect ratio of the input signal. |
| • <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal. |
| • A signal not in the standard mode table is not supported. |
| • If the resolution is set to the optimal resolution, the aspect ratio does not change whether |
| the <Image Size> is set to <Auto> or <Wide>. |
AV signals
•<4:3> - Displays pictures at the 4:3 aspect ratio.
•<16:9> - Displays pictures at the 16:9 aspect ratio.
•<Screen Fit> - If a 720P, 1080i or 1080P signal is input in DVI input mode, the picture is displayed as is without truncation.
This can only be set when the external input is connected through DVI and <PC/AV Mode> is set to <AV>.
Menu | You can adjust the horizontal position of the OSD. |
|
|
Menu | You can adjust the vertical position of the OSD. |
SETUP&RESET
MENU |
| DESCRIPTION |
|
| |
Reset | Use this function to restore the visual quality and color settings to the factory defaults. | |
| • | <No> - <Yes> |
|
| |
Menu Transparency | You can select the transparency of the OSD. | |
| • | <Off> - <On> |
|
| |
Language | Select a language for the OSD. |
The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC.
Using the product |