Dimensions WxDxH/ Weight Without Stand

Less than 34 W

Dimensions (WxDxH)/ Weight (Without Stand)

366 x 60.2 x 301.4 mm / 14.4 x 2.4 x 11.9 inch

Dimensions (WxDxH)/ Weight (Simple Stand)

366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 3.4 kg

Dimensions (WxDxH)/ Weight (Pivot Stand)

366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg

Dimensions (WxDxH)/ Weight (Sliding Stand)

366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg

Dimensions (WxDxH)/ Weight (Lowest HAS Stand)

366.0 X 200.0 X 351.4 mm / 14.4 X 7.9 X 13.8 inch (with Basic Stand) / 4.8 kg

VESA Mounting Interface

75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating	Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C)
	Humidity: 10% ~ 80%, non-condensing

Storage	Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C)
	Humidity: 5% ~ 95%, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problelms.

zFor example, the number of TFT LCD sub pixels contained in this product are 3,932,160.

Note: Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas.

(Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.

State	Normal	Power saving	Power off	Power off
			EPA/ENERGY
	Operation	mode		(Power Switch)
			2000