| Lighting Systems |
Page of 8 | 2 Light T8 Direct/Indirect |
Wiring Options: 2 Circuit Left/Right Switching
2 Circuit Left/Right Switching
Type 2: 2cct.
Type 9: 2cct. w/1cct. thru wire
Type I: 2cct. w/2cct. thru wire
Fixture wired for two circuit. Lamps wired for left/right switching.
2 Circuit Left/Right Switching with Emergency Circuit/Night Light (EC/NL)
Type 4: 2cct. w/EC/NL
%#., | ||
%#., |
One 4’ section in two circuit fixture (left/right switching) to be wired on a separate thru circuit. Leads for both normal circuit and EC/NL circuit wired to fixture ends. All lamps in EC/NL section to be wired together.
2 Circuit Left/Right Switching with Emergency Battery Pack (EM)
Type 6: Chloride standard C700A
Type N: Bodine standard B70A
Type F: Chloride high performance C1400
Type Q: Bodine high performance B50
%- |
Fixture wired for two circuits (left/right switching), plus a battery pack is wired to one lamp. A hot lead is connected to the battery pack and would act as a ‘trigger’ wire when connected to a constant hot by installer. Leads for both normal circuit and battery pack are wired to fixture ends.
*Note:
2 Circuit Left/Right Switching with Emergency Circuit/Night Light and Emergency Battery Pack
Type K: Chloride standard (C700A for T8, CTP700 for T5 HO)
%#., %- | ||
%#., |
One 4’ section in a two circuit fixture (left/right switching) to be wired on a separate thru circuit, in addition, a battery pack is wired to one lamp. Installer can connect ‘trigger’ wire to EC hot lead if controlled together or wired separately if controlled independently. Leads for normal circuit, EC/NL and battery pack are wired to fixture ends. All lamps in EC/NL section to be wired together.
*Note:
Job Information | Type: |
Lightolier a Genlyte Company | www.lightolier.com |
631 Airport Road, Fall River, MA 02720 • (508)
© 2005 Genlyte Group LLC • 0205 Rev.1